Two-Tier Stacked Cylindrical Upholstered Low Ottoman Stool (model CYL-OTT-470) is listed under Fabric Office Sofa, with overall dimensions of 490 × 490 × 470 mm and main material of Fabric. Certifications: Modern,design,fully,upholstered,stationary,seating,two-tier,cylindrical,structure. This page consolidates 6 groups of specifications, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 490 x 490 x 470 mm | |
|---|---|---|
| Upper seating cylinder diameter | 490 mm | |
| Lower base cylinder diameter | 380 mm | |
| Upper seating section height | 280 mm | |
| Lower base section height | 170 mm | |
| Seat surface height | 470 mm | |
| Foot height | 20 mm | |
| Foot contact diameter | 25 mm | |
| Seat padding thickness | 120 mm | |
| Foot spacing diameter | 340 mm | |
| Edge radius | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 11.3 kg | |
|---|---|---|
| Static weight capacity | 113 kg | |
| Foam density (seat) | 35 kg/m³ | |
| Foam rebound rate | 45% | |
| Fabric abrasion resistance | 30000 double rubs | |
| Foot floor clearance | 20 mm | |
| Seam stitch pitch | 8 stitches per inch | |
| Color option count | 6 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Woven polyester fabric, matte soft finish, 0.6 mm thickness | |
|---|---|---|
| Internal padding | High-density polyurethane foam, CFC-free | |
| Internal frame | 12 mm thick plywood structural frame, kiln-dried | |
| Support feet | Injection-molded black plastic, non-slip rubber base pad | |
| Seam construction | Nylon-bonded thread, double-stitched perimeter joints | |
| Base underside | Black non-woven fabric dust cover, stapled to frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Stationary single-person seat for lounge, vanity or entry use | |
|---|---|---|
| Footrest function | Low profile suitable for use as a footrest in front of lounge seating | |
| Floor protection | Non-slip feet prevent scuffing and sliding on hard floor surfaces | |
| Color customization | Available in two-tone (colored upper/grey lower) and solid monochrome finishes |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Lounge area seating | Suitable for casual supplementary seating in office breakout zones and living rooms | |
|---|---|---|
| Vanity/entry use | Works as low vanity stool or entry shoe-changing seat |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp