| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1220 x 1220 x 760 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Tabletop metal edge trim width | 10 mm | |
| Floor ring base diameter | 600 mm | |
| Central cinch band height | 30 mm | |
| Central cinch band width | 80 mm | |
| Under-table knee clearance height | 690 mm | |
| Pedestal metal rod diameter | 12 mm | |
| Floor to bottom of tabletop clearance | 735 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 70 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 100 kg | |
| Maximum seating capacity | 4 people | |
| Base static stability load | 150 kg | |
| Surface abrasion resistance (tabletop) | 3000 cycles | |
| Metal base scratch resistance | 2000 cycles | |
| Warranty period | 3 years | |
| Leveling foot adjustment travel | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 18mm high-density particleboard core | |
|---|---|---|
| Tabletop surface | Faux marble printed high-pressure laminate | |
| Tabletop edge trim | Brushed brass-finished metal band | |
| Pedestal frame material | 1.2mm wall thickness 201 stainless steel tubing | |
| Pedestal finish | Brushed brass PVD gold plating | |
| Central cinch collar | Solid welded stainless steel band | |
| Floor support ring | Bent welded stainless steel tube ring | |
| Floor contact pads | Non-slip rubber leveling feet | |
| Hardware connectors | M8 zinc-plated steel mounting bolts | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop design | Fixed non-extension round top, no folding or extension mechanism | |
|---|---|---|
| Pedestal structure | Single central hourglass open frame, no corner legs to obstruct seating | |
| Leveling adjustment | Bottom adjustable rubber feet, compensates for 10mm uneven floor height | |
| Seating access | 360-degree unobstructed leg clearance around central pedestal | |
| Surface maintenance | Stain-resistant non-porous faux marble top, wipe clean with damp cloth | |
| Assembly requirement | Two-person adult assembly, attach base to tabletop with included hardware | |
| Base construction | Fully welded pedestal frame, no loose base component assembly required | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Seats 4 for small apartment and compact home dining spaces | |
|---|---|---|
| Apartment open-plan living | Glam gold finish complements modern and contemporary interior schemes | |
| Cafe and bistro seating | Pedestal design maximizes seating flexibility for casual food service | |
| Hotel guest room dining nook | Decorative open base adds visual interest without visual bulk | |
| Event and rental staging | Scratch-resistant surface holds up to frequent setup and teardown | |
| Breakfast nook placement | Round shape eliminates sharp corners for family-friendly seating |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 15372:2008 | Furniture – Safety, strength and durability requirements for non-domestic tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate testing | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test for furniture surfaces, applicable to tabletop finish | |
| GB/T 3327-2017 | Stability and mechanical performance requirements for tables |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate testing; 2. GB/T 4893.8-2013: Surface wear resistance test for furniture surfaces, applicable to tabletop finish; 3. GB/T 3327-2017: Stability and mechanical performance requirements for tables; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
