| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Base floor contact diameter | 450 mm | |
| Pedestal shaft minimum diameter | 60 mm | |
| Undertable knee clearance height | 710 mm | |
| Undertable leg clearance radius | 350 mm | |
| Tabletop overhang past base edge | 175 mm | |
| Floor clearance under base flange | 2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 18 kg | |
|---|---|---|
| Static tabletop load capacity | 50 kg | |
| Recommended seating capacity | 2 persons | |
| Stability lateral tip load | 15 kg | |
| Surface scratch resistance | 300 cycles | |
| Surface heat resistance | 80 °C | |
| Surface dry heat resistance | 80 °C | |
| Finish adhesion durability | 1000 hours | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 18mm MDF substrate | |
|---|---|---|
| Tabletop finish | White polyurethane matte lacquer coating | |
| Pedestal shaft | Molded ABS plastic with white painted finish | |
| Floor base plate | Die-cast aluminum composite with white powder coated finish | |
| Tabletop to pedestal connection | Steel M8 mounting bolt set | |
| Base underside floor protection | 3mm thick EVA felt pads | |
| Edge profile | 2mm rounded safety edge | |
| Core moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Seating access | 360 degree unobstructed access around central pedestal | |
|---|---|---|
| Floor protection | Pre-applied anti-scratch felt pads on base underside | |
| Surface maintenance | Non-porous sealed finish allows wipe-clean maintenance | |
| Assembly requirement | Two-point knockdown assembly | |
| Weight distribution | Centered pedestal design evenly distributes load across base plate | |
| Color consistency | Uniform white finish across tabletop, stem and base | |
| Stability performance | Flared weighted base design reduces wobble on level hard floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 870 x 870 x 130 mm | |
| Gross shipping weight | 21 kg | |
| Shipping volume per unit | 0.1 CBM | |
| assembly time | 20 minutes | |
| 20ft GP container loading quantity | 220 units | |
| 40ft HQ container loading quantity | 540 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Small apartment dining nook | 800mm compact footprint fits in studio apartments or small kitchen spaces, accommodates two diners without excessive floor space usage | |
|---|---|---|
| Breakfast or casual dining area | Standard 750mm dining height pairs with standard dining chairs for casual meal service in kitchen or open plan living spaces | |
| Office breakout or waiting area | Sleek modern white finish works in contemporary office lounge spaces for guest seating, casual meetings or refreshment service | |
| Balcony or covered outdoor seating | Lightweight sealed construction can be used in covered outdoor patios, not recommended for permanent exposure to direct rain or extreme weather | |
| Cafe or boutique seating | Compact size works for small bistro or cafe seating arrangements, paired with molded side chairs for a minimalist mid-century modern aesthetic | |
| Temporary event seating | Lightweight knockdown construction allows easy transport and setup for pop-up events, showrooms or temporary display use | |
| Casual kitchen breakfast area | 750mm standard dining height pairs with 450mm seat height dining chairs for daily meal service in kitchen or open-plan living dining zones | |
| Office breakout refreshment area | Minimalist white matte finish complements contemporary office lounge spaces, suitable for guest refreshment service and small informal 2-person meetings |
EU Market Access Requirements* EN Standards
| Domestic table safety recommendation | EN 12521:2015 | |
|---|---|---|
| Surface resistance recommendation | EN 15187:2007 | |
| Surface heat resistance recommendation | EN 15187:2007 | |
| Surface impact recommendation | EN 15185:2011 |
Standards applicable to China-market projects
| Table stability recommendation | GB/T 3324 | |
|---|---|---|
| Surface finish recommendation | GB/T 4893.4 | |
| Formaldehyde emission recommendation | GB 18584 | |
| Structural strength recommendation | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Table stability recommendation: GB/T 3324; 2. Surface finish recommendation: GB/T 4893.4; 3. Formaldehyde emission recommendation: GB 18584; 4. Structural strength recommendation: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
