Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 600 × 750 mm
Tabletop thickness with edge trim	25 mm
Square floor base dimensions	450 x 450 mm
Central support column diameter	76 mm
Upper matte black column section height	490 mm
Lower gold column section height	130 mm
Minimum knee clearance height under tabletop	710 mm
Tabletop corner bevel radius	30 mm
Floor base plate thickness	8 mm
Gold edge trim width	15 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Table net weight	25 kg
Distributed static tabletop load capacity	136 kg
Recommended seating capacity	3 people
Sintered stone surface abrasion resistance	6000 cycles
Base anti-slip pad static friction coefficient	0.6
Maximum uneven floor tolerance for stable placement	5 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop surface layer	12 mm thick sintered stone, white marble-look polished finish
Tabletop edge trim	0.8 mm thick polished gold-plated stainless steel
Upper support column section	1.5 mm thick matte black powder-coated steel tube
Lower support column section	1.2 mm thick polished gold-plated stainless steel sleeve
Floor base plate	8 mm thick brushed gold stainless steel flat plate
Undertable support bracket	2 mm thick powder-coated steel cross bracket
Base bottom pads	5 mm thick non-slip rubber floor protectors
Assembly hardware	M8 zinc-plated steel connecting bolts and washers
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Knock-down assembly structure	Tabletop, column and base ship disassembled for reduced shipping volume
Four-direction knee clearance	Open space around central column supports seating from all four sides
Stain-resistant tabletop surface	Non-porous sintered stone surface resists liquid spills and food stains
Heat-resistant tabletop	Sintered stone surface withstands hot tableware up to 180°C without damage
Floor protection design	Rubber pads under base prevent scratching hard flooring during use
Fixed height design	750 mm standard dining height compatible with standard dining chairs
Easy surface maintenance	Smooth metal and stone surfaces wipe clean with standard commercial cleaning agents
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Commercial cafe seating areas	Compact footprint fits tight spacing for coffee shop and bistro dine-in service
Small apartment dining nooks	600mm square size saves floor space in compact residential dining areas
Boutique hotel lobby lounge areas	Two-tone black and gold finish matches modern light luxury interior design schemes
Milk tea and dessert shop seating	Stain-resistant easy-clean surface supports high-turnover food service use
Co-working office breakout areas	Compact size supports casual meeting and break space for small teams

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015 Furniture - Strength, durability and safety for domestic dining tables	Sets minimum strength and stability requirements for dining table use
EN 1022:2018 Domestic furniture - Seating - Determination of stability	Reference for associated seating stability when used with this table

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.5-2021 Desk/Table Products Test	Defines commercial-grade table load and durability test methods
ANSI/BIFMA X7.1-2020 Furniture Sustainability Standard	Provides framework for low-emission material selection for commercial projects

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017 General technical requirements for wooden furniture	Applies to structural safety and dimension tolerance of the table substrate
GB/T 4893.4-2013 Furniture surface adhesion test	Applicable for verifying coating adhesion on metal components

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to structural safety and dimension tolerance of the table substrate;
2. GB/T 4893.4-2013 Furniture surface adhesion test: Applicable for verifying coating adhesion on metal components;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · SQ-BISTRO-600-BG-SLATE

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · SQ-BISTRO-600-BG-SLATE

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · SQ-BISTRO-600-BG-SLATEOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This contemporary square bistro dining table features a sleek light luxury aesthetic anchored by a single pedestal structure, ideal for spaces prioritizing refined, space-efficient design. Its 600 mm wide square tabletop is finished in polished white marble-look sintered stone, with soft beveled corners trimmed in polished gold-plated stainless steel for a polished, tactile edge. The central pedestal combines a tall matte black upper column with a shorter polished gold lower section, paired with a brushed gold square floor base to create a striking two-tone black and gold visual profile that balances modern minimalism with subtle opulence. The open central layout delivers unobstructed four-direction knee clearance of 710 mm under the tabletop, eliminating obstructive legs to support flexible seating access from all sides. Constructed for durable daily use, the table’s 12 mm sintered stone surface sits atop a powder-coated steel cross support bracket, with total tabletop thickness measuring 25 mm at the trimmed edge. Metal components use thickness-optimized steel and stainless steel for each section: 1.5 mm thick matte powder-coated steel for the upper support column, 1.2 mm thick polished gold-plated stainless steel for the lower column sleeve, and an 8 mm thick brushed gold stainless steel base plate. The table uses M8 zinc-plated steel bolts and washers for assembly, with 5 mm thick non-slip rubber pads fitted to the base bottom to prevent floor scratches. Weighing 25 kg net, the table supports a 136 kg distributed static load on its tabletop, with a sintered stone surface rated for 6000 cycles of abrasion resistance and able to withstand hot tableware up to 180°C without damage. Its non-porous surface resists liquid spills and food stains, wiping clean easily with standard commercial cleaning agents for low-effort upkeep. The 750 mm fixed standard dining height pairs seamlessly with standard dining chairs, and the base maintains stable placement on floors with up to 5 mm of unevenness. The table uses a knock-down assembly structure, shipped in two cartons per set to reduce shipping volume, with a reference assembly time of 40 minutes per unit. Its compact footprint suits a wide range of settings, including commercial cafe dine-in areas, small apartment dining nooks, boutique hotel lobby lounges, high-turnover milk tea and dessert shops, and co-working office breakout spaces, as its two-tone finish aligns with modern light luxury interior schemes. For procurement, note that shipments are delivered as two separate cartons per set with a packaged gross weight of 90 kg and total packaging volume of 0.55 m³, and the table is recommended to seat 3 people to maintain comfortable elbow room during use.

Contemporary Square Bistro Dining Table with Marble-Look Top and Black-Gold Pedestal Base Specifications

Suppliers and stock