| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 700 x 400 x 1100 mm | |
|---|---|---|
| Tabletop thickness | 32 mm | |
| Support column cross-section width | 76 mm | |
| Base plate dimensions | 450 x 450 mm | |
| Under-table knee clearance height | 1068 mm | |
| Floor glide height | 5 mm | |
| Tabletop edge overhang from column | 312 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Static tabletop load capacity | 227 kg | |
|---|---|---|
| Net product weight | 30 kg | |
| Recommended maximum seating capacity | 2 persons | |
| Surface scratch resistance rating | 2000 cycles | |
| Surface heat resistance temperature | 120 °C | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-density particleboard core | |
|---|---|---|
| Tabletop surface | Dark grey matte melamine laminate | |
| Tabletop edge banding | Matching dark PVC T-molding | |
| Support column | 1.5 mm thick matte black powder-coated steel | |
| Base plate | 3 mm thick matte black powder-coated steel | |
| Mounting hardware | Zinc-plated steel bolts and mounting plate | |
| Floor protection pads | Non-marking rubber glides | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Fixed non-adjustable 1100 mm bar height | |
|---|---|---|
| Assembly structure | Knock-down three-part connection: base, column, tabletop | |
| Floor leveling | Minor height adjustment via base corner rubber glides | |
| Surface maintenance | Stain and moisture resistant wipe-clean laminate surface | |
| Seating access | 360-degree unobstructed perimeter access for bar stools | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Commercial cafe/bar use | High-traffic hospitality seating for drink service, compact footprint for small spaces | |
|---|---|---|
| Home kitchen bar area | Space-saving extra dining or prep surface for open-plan residential layouts | |
| Office breakout area | Casual standing-height collaboration or quick refreshment point in workspaces | |
| Small balcony/patio indoor use | Compact bistro seating for two, dry indoor sheltered outdoor placement | |
| Event/catering rental use | Portable knock-down design for temporary function and cocktail event setups |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture for non-domestic use, strength/durability requirements for tables | |
|---|---|---|
| EN 12521:2015 | Furniture for hospitality use, safety/strength requirements for catering tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to laminate tabletop quality inspection | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture surfaces, applicable to tabletop finish | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable to static load stability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to laminate tabletop quality inspection; 2. GB/T 4893.4-2013: Surface wear resistance test method for furniture surfaces, applicable to tabletop finish; 3. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable to static load stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
