| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1000 x 1000 x 760 mm | |
|---|---|---|
| tabletop diameter | 1000 mm | |
| tabletop thickness | 30 mm | |
| leg section size (top attachment) | 60 x 40 mm | |
| leg section size (floor contact) | 30 x 30 mm | |
| cross-stretcher width | 45 mm | |
| floor to cross-stretcher clearance | 220 mm | |
| under-table knee clearance height | 670 mm | |
| leg spread diameter at floor | 920 mm | |
| overhang from leg attachment to table edge | 80 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net product weight | 25 kg | |
|---|---|---|
| static distributed tabletop load capacity | 100 kg | |
| recommended seating capacity | 4 people | |
| leg connection shear load per joint | 120 kg | |
| finish abrasion resistance | 4000 cycles | |
| wood moisture content at delivery | 10% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop surface layer | 0.6mm thick light oak wood veneer | |
|---|---|---|
| tabletop core substrate | 18mm thick MDF or particleboard core | |
| table edge banding | Matching solid wood edge banding | |
| table legs | Solid rubberwood tapered splayed legs | |
| cross-stretcher bracing | Solid rubberwood interlocking X-frame | |
| surface finish | Matte clear nitrocellulose lacquer | |
| foot pads | 5mm thick non-slip PE plastic floor glides | |
| assembly hardware | Zinc-plated steel hex bolts and barrel nuts | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| tabletop configuration | Fixed non-extendable circular top | |
|---|---|---|
| structural support | Four-point splayed leg with X-cross stretcher | |
| assembly requirement | Knockdown leg and brace attachment to top | |
| floor protection | Replaceable plastic glides on each leg foot | |
| leveling adjustment | Fixed non-adjustable leg height | |
| surface use suitability | Heat resistant up to 80C for short contact | |
| cleaning compatibility | Wipe-clean with damp cloth and mild detergent | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| small apartment dining nook | 1000mm diameter fits compact kitchen and studio spaces without blocking circulation | |
|---|---|---|
| casual kitchen dining area | Light natural oak finish complements neutral Scandinavian or mid-century interiors | |
| small café seating area | Durable solid wood construction supports daily commercial light use | |
| home office meeting corner | Can function as a small informal meeting table for 3people | |
| balcony enclosed sunroom dining | Sealed wood finish resists minor humidity fluctuations in semi-sheltered spaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for table surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to domestic dining tables | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to domestic dining tables; 2. GB 18584-2001: Limit of harmful substances in wood furniture for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
