Product supplierRound Pedestal Bistro Table with Round Top, Tapered Wood Column and Dark Disc Base, 18mm thick MDF core
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 800 × 800 × 750 mm | |
|---|---|---|
| Tabletop diameter | 800 mm | |
| Tabletop edge thickness | 40 mm | |
| Tapered column top diameter | 150 mm | |
| Tapered column bottom diameter | 100 mm | |
| Base disc diameter | 450 mm | |
| Base disc thickness | 30 mm | |
| Under-table knee clearance height | 690 mm | |
| Floor to column underside clearance | 0 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 35 kg | |
|---|---|---|
| Static tabletop uniform load capacity | 100 kg | |
| Static base tip load (edge applied) | 20 kg | |
| Seating capacity | 2 persons | |
| Surface abrasion resistance (recommended) | 3000 cycles | |
| Edge impact resistance (recommended) | 450 mm drop | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 18mm thick MDF core | |
|---|---|---|
| Tabletop surface finish | Walnut-toned wood veneer with semi-gloss polyurethane coating | |
| Tabletop edge profile | Rounded solid wood edge banding, 40mm total thickness | |
| Support column | Tapered solid hardwood or veneer-wrapped MDF column, walnut finish | |
| Base disc core | High-density particleboard or engineered stone composite, dark charcoal finish | |
| Base edge trim | Polished chrome-plated metal edge band | |
| Column-to-base mounting hardware | Zinc-plated steel M8 mounting bolts and threaded inserts | |
| Underside tabletop hardware | Steel mounting plate with 4 bolt fixings | |
| Floor contact pads | 8mm thick non-slip rubber pads | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating arrangement | Accommodates two dining chairs placed around the perimeter with no leg obstruction from central pedestal | |
|---|---|---|
| Surface utility | Semi-gloss sealed surface supports direct placement of drinkware, plates, and small decorative items with stain resistance for food and beverage spills | |
| Assembly requirement | Knock-down construction requiring 4 bolt connections between tabletop, column and base | |
| Stability performance | Weighted 450mm diameter disc base prevents tipping when loads are applied to the table edge | |
| Floor protection | Recommended rubber foot pads under base disc prevent scratching of hardwood, tile or vinyl flooring and allow minor leveling adjustment | |
| Surface maintenance | Smooth non-porous finish allows removal of common food and drink stains with a damp soft cloth, avoiding harsh abrasive cleaners that damage the glossy veneer | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Number of packages | 1 | |
|---|---|---|
| Reference carton dimensions | 850 x 850 x 120 mm | |
| Reference gross weight | 40 kg | |
| Reference carton volume | 0.087 CBM | |
| Assembly time | 20 minutes | |
| 20ft GP container loading quantity | 320 units | |
| 40ft HQ container loading quantity | 760 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining nooks | Fits compact kitchen or breakfast nook spaces for two-person casual meals, with small footprint that leaves surrounding circulation space | |
|---|---|---|
| Cafe and bistro seating | Suitable for small commercial food service areas paired with lightweight dining chairs for individual or couple seating | |
| Hotel guest room dining areas | Appropriate for studio or boutique hotel rooms as a compact work and dining surface, with stable pedestal design that avoids leg obstruction | |
| Office breakout spaces | Usable as a small meeting or refreshment table in staff lounge areas for short breaks and informal discussions | |
| Reception waiting areas | Works as a side or accent table to hold reading materials, beverages and small decorative arrangements in lounge waiting zones | |
| Small balcony or patio indoor use | Sized for covered balcony spaces as a compact dining surface for two people, intended for indoor or fully sheltered outdoor use only |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables | Applies to structural safety, stability and durability performance requirements for domestic dining use | |
|---|---|---|
| EN 13722:2004 Furniture - Test methods for the assessment of surface resistance to cold liquids | Applies to verification of stain resistance for food and beverage spills on the tabletop surface |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to dimensional tolerance, edge finishing, structural stability and surface quality acceptance for this wood-based dining table | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies to formaldehyde emission limits for all wood-based panel components used in the tabletop, column and base | |
| GB/T 10357.1-2013 Test of mechanical properties of furniture - Strength and durability of tables | Applies to static load, impact and fatigue testing for tabletop structure and base stability verification |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to dimensional tolerance, edge finishing, structural stability and surface quality acceptance for this wood-based dining table; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applies to formaldehyde emission limits for all wood-based panel components used in the tabletop, column and base; 3. GB/T 10357.1-2013 Test of mechanical properties of furniture - Strength and durability of tables: Applies to static load, impact and fatigue testing for tabletop structure and base stability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool