Product supplierRound Sintered Stone Top Dining Table with Brushed Gold Pedestal Base, 12mm polished sintered stone with natural marble-look veining
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 800 × 800 × 750 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 38 kg | |
|---|---|---|
| Static tabletop load capacity | 150 kg | |
| Recommended seating capacity | 2 people | |
| Surface scratch resistance | 6 Mohs | |
| Surface heat resistance | 180 °C | |
| Base stability offset load | 30 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | 12mm polished sintered stone with natural marble-look veining | |
|---|---|---|
| Tabletop edge trim | 1mm polished metal edging matching pedestal finish | |
| Upper pedestal column | 1.5mm thick brushed gold 304 stainless steel, tapered conical form | |
| Middle pedestal accent | High-gloss black lacquered MDF panel, wrapped around column center | |
| Lower pedestal column | 1.5mm thick brushed gold 304 stainless steel, tapered conical form | |
| Floor base plate | 8mm thick brushed gold 304 stainless steel, circular flat disc | |
| Base bottom padding | 3mm thick non-slip EVA rubber pads, 4 pieces placed at base corners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Surface cleaning function | Non-porous sintered stone top allows direct wipe-down of spills without staining | |
|---|---|---|
| Floor protection function | Full circular base distributes weight evenly, EVA pads prevent hardwood floor scratching | |
| Seating access function | Single central pedestal removes obstructive table legs, allows unobstructed legroom for all seats | |
| Assembly structure | 3-part knockdown construction: tabletop, pedestal column, base plate connected via threaded hardware | |
| Surface usage suitability | Heat-resistant top supports placement of hot serving dishes up to 180°C without damage | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Small apartment dining area | 800mm diameter footprint fits compact open-plan kitchen spaces for 2-person meals | |
|---|---|---|
| Luxury hotel guest room seating nook | Gold and stone finish matches upscale hospitality interior design schemes | |
| Office reception lounge | Suitable for holding beverage trays and reading materials in waiting areas | |
| Cafe or bistro table seating | Durable scratch-resistant surface withstands daily commercial food service use | |
| Balcony casual dining space | Metal base resists mild humidity for covered outdoor patio placement |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool