| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall footprint | 2100 x 700 x 600 mm | |
|---|---|---|
| Single chair overall dimensions | 650 x 650 x 600 mm | |
| Single chair seat height | 280 mm | |
| Single chair seat diameter | 350 mm | |
| Single chair back opening height | 320 mm | |
| Middle table unit overall dimensions | 550 x 550 x 500 mm | |
| Table top diameter | 400 mm | |
| Shell wall thickness | 8 mm | |
| Unit base contact diameter | 450 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Single chair static load capacity | 80 kg | |
|---|---|---|
| Single chair unit weight | 8 kg | |
| Table unit weight | 6 kg | |
| Recommended user age range | 6 years | |
| Recommended number of users per set | 2 children | |
| Tip resistance threshold | 15 degree tilt without tipping | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair outer shell | Glossy light peach-toned molded plastic | |
|---|---|---|
| Chair inner shell and table upper shell | Glossy white molded plastic | |
| Chair seat pads | Glossy yellow molded plastic | |
| Table top center accent | Glossy yellow circular molded insert | |
| Shell surface finish | High-gloss UV resistant coating | |
| Base contact surface | Smooth molded plastic edge | |
| Structural shell construction | Single-piece hollow rotational molded plastic | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
Adjustment / rotation / tilt / mobility / storage features
| Enclosed bucket seating design | Curved wraparound eggshell back provides full side and back support for young children, prevents sideways falls during active play | |
|---|---|---|
| Integrated fixed seat position | Yellow seat pad is fixed at ergonomic child height, no adjustment required for quick, simple use | |
| Easy wipe-clean surface | Continuous high-gloss non-porous plastic surfaces allow quick cleaning of spills, crayon marks or food residue with standard household cleaners | |
| Stackable storage capability | Matching tapered egg shape allows units to be nested partially for compact storage when not in use | |
| Multi-environment use | Waterproof plastic construction supports use in playrooms, daycares, covered balconies, preschools and outdoor patio play areas | |
| Decorative novelty design | Broken cracked eggshell motif with yolk-colored seat accents serves as both functional seating and playful decorative element for child-focused spaces | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Number of shipping units per set | 3 pieces | |
|---|---|---|
| Master shipping carton dimensions | 700 x 700 x 650 mm | |
| Gross shipping weight per set | 25 kg | |
| Shipping volume per set | 0.32 CBM | |
| Assembly time per set | 10 minutes | |
| 20ft GP container loading quantity | 84 sets | |
| 40ft HQ container loading quantity | 208 sets | |
| Packaging material protection | 5mm thick EPE foam wrap plus 5-layer corrugated carton | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Home children's playroom application | Sized for two young children to use for coloring, snack time, toy play or reading activities, playful egg design complements colorful playroom decor | |
|---|---|---|
| Preschool and daycare center application | Durable easy-clean plastic construction supports high-frequency daily use by groups of young children, rounded edges eliminate sharp corner hazards | |
| Themed family restaurant play area application | Novelty egg design creates engaging photo-worthy seating for kids' dining zones, waterproof surfaces withstand frequent food and drink spills | |
| Covered balcony and residential patio application | Weather-resistant plastic material does not degrade with incidental moisture exposure, provides casual child seating for outdoor family activities | |
| Pediatric clinic and waiting area application | Playful non-institutional design reduces child anxiety in medical waiting spaces, easy disinfection supports clinical hygiene requirements | |
| Photography studio children's set prop application | Distinctive cartoon egg shape works as a functional prop for toddler and young child portrait sessions, available in bright attractive colors for photos | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Applicable safety standard recommendation | EN 1729:2015 Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions | |
|---|---|---|
| Applicable stability recommendation | EN 1022:2018 Domestic furniture - Seating - Determination of stability |
Standards applicable to China-market projects
| Applicable safety standard recommendation | GB 28007 General technical requirements for children's furniture | |
|---|---|---|
| Applicable material safety recommendation | GB 6675.1 Toy safety Part 1: Basic specification | |
| Applicable mechanical safety recommendation | GB 6675.2 Toy safety Part 2: Mechanical and physical properties |
This product must meet the following technical requirements: 1. Applicable safety standard recommendation: GB 28007 General technical requirements for children's furniture; 2. Applicable material safety recommendation: GB 6675.1 Toy safety Part 1: Basic specification; 3. Applicable mechanical safety recommendation: GB 6675.2 Toy safety Part 2: Mechanical and physical properties; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
