| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | Φ800 x 760 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Central pedestal column diameter | 76 mm | |
| 4-prong cross base spread | 610 mm | |
| Single cross foot length | 300 mm | |
| Cross foot cross-section width | 40 mm | |
| Under-table knee clearance height | 720 mm | |
| Tabletop edge lip thickness | 12 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 12 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 120 kg | |
| Recommended seating capacity | 4 people | |
| Base static stability load offset | 30 kg | |
| Powder coating thickness | 80 μm | |
| Surface abrasion resistance | 2000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop construction | Diamond-lattice perforated steel mesh with rolled steel rim | |
|---|---|---|
| Central support column | Seam-welded powder-coated steel tube | |
| Cross base feet | Cast iron with matte black powder coating | |
| Foot pads | Injection-molded non-slip nylon floor protectors | |
| Surface finish system | E-coat primer with matte black powder topcoat | |
| Assembly hardware | Zinc-plated steel bolts and lock washers | |
| Tabletop support plate | 3mm thick steel mounting plate welded to column top | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Freestanding pedestal support | Single central column creates 360° unobstructed legroom around the table perimeter | |
|---|---|---|
| Floor leveling adjustment | Threaded adjustable feet on each cross base end | |
| Weather-resistant surface | Perforated mesh tabletop allows rainwater drainage for outdoor use | |
| Knock-down assembly | Tabletop, column and base ship disassembled for compact transport | |
| Umbrella compatibility | Optional central 60mm diameter hole fits standard patio umbrella poles | |
| Scratch-resistant surface | Cured powder coat resists scuffs from tableware, drinkware and daily use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Commercial cafe patio use | Compact footprint fits small outdoor seating areas for food service operations | |
|---|---|---|
| Residential balcony dining | 800mm diameter fits small balcony spaces for 4person casual meals | |
| Indoor breakfast nook placement | Unobstructed pedestal design works in compact kitchen dining corners | |
| Bistro bar sidewalk seating | Stable 4-prong base resists tipping on slightly uneven sidewalk surfaces | |
| Contract break room furnishing | Easy-to-clean metal surface supports daily breakroom use for staff dining |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety requirements for outdoor seating and tables for domestic and contract use | |
|---|---|---|
| EN 581-3:2017 | Mechanical safety and performance test methods for outdoor tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to structural safety and finish performance | |
|---|---|---|
| GB/T 17657-2013 | Test methods for surface finish durability, abrasion and corrosion resistance for metal furniture surfaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to structural safety and finish performance; 2. GB/T 17657-2013: Test methods for surface finish durability, abrasion and corrosion resistance for metal furniture surfaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
