Product supplierHigh-Back Tufted Brown Leather Executive Swivel Lounge Chair, Top-grain leather or leather-match cover in brown, with piped and sewn perimeter panels
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 760 × 820 × 1180 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight | 160 kg | |
|---|---|---|
| Static seat proof load | 640 kg | |
| Backrest cyclic load target | 120,000 cycles | |
| Seat cushion indentation hardness | 45 kg ILD | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam resilience | 45% | |
| Net weight | 26 kg | |
| Seating capacity | 1 person | |
| Warranty target | 5 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Top-grain leather or leather-match cover in brown, with piped and sewn perimeter panels | |
|---|---|---|
| Tufted back panel | Leather-look brown upholstery over diagonal channel tufting with recessed buttons | |
| Seat cushion | High-resilience polyurethane foam at 45 kg/m3 wrapped in 20 mm soft fiber | |
| Back cushioning | 35 kg/m3 polyurethane foam with 15 mm fiber fill under tufted cover | |
| Internal seat board | 15 mm molded plywood or hardwood-composite support board | |
| Bent outer shell | 12 mm bent plywood shell with walnut-tone veneer on exposed lower rails | |
| Integrated armrests | Upholstered padded arm caps bonded to the bent plywood side shell | |
| Center column | 50 mm chrome-plated steel gas-lift tube with polished outer sleeve | |
| Four-star base | Polished die-cast aluminum arms with 8 mm structural wall thickness | |
| Floor contacts | 45 mm non-marking nylon or TPE glides, one fitted to each base arm | |
| Internal frame | 25 x 25 x 1.5 mm steel reinforcement frame inside the upholstered body | |
| Stitching | Polyester-bonded thread with 8 stitches per 50 mm seam pitch |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Swivel function | 360-degree rotation around the chrome pedestal with automatic return-free movement | |
|---|---|---|
| Seat height adjustment | Pneumatic lift with 100 mm stroke and 450 mm maximum seat height | |
| Back comfort function | Fixed high-back shell with integrated headrest and non-reclining lumbar support | |
| Tufted back support | Diagonal channel tufting divides the back into 12 padded support zones | |
| Arm support | Fixed wraparound armrests provide continuous forearm and side support | |
| Base stability | Four-star polished base with four glides provides stationary support on hard floors | |
| Floor protection | 45 mm non-marking glides distribute load without rolling or carpet crushing | |
| Color option count | 1 visible brown upholstery color with walnut-tone shell trim | |
| Cleaning access | Smooth leather-like seat and back surfaces permit wipe-down maintenance without removable cushions | |
| Assembly method | Seat body locates onto the gas-lift spindle and base without field-installed arms | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Gross weight | 32 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Suitable behind a manager desk or as a visitor chair where a high-back leather appearance is required | |
|---|---|---|
| Private meeting suite | Appropriate for one-on-one discussions and quiet consultation rooms | |
| Upscale reception area | Can serve as a statement lounge seat in hotel or corporate waiting zones | |
| Home office | Fits users seeking a formal leather chair with stationary, non-caster support | |
| Boardroom visitor seating | Use in pairs across 2200 mm conference tables with 750 mm seat clearance | |
| Hard-floor interiors | Best for wood, tile, marble, and low-pile carpet because glides replace casters | |
| Commercial specification package | Recommended procurement includes leather grade, foam certificates, BIFMA test report, and finish samples | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139 seating | Use Level 2 non-domestic seating strength, durability, and safety requirements for executive-office areas | |
|---|---|---|
| EN 1022 stability | Applicable standards and test results require confirmation | |
| EN 12521 furniture safety | Apply mechanical safety requirements for seating used in non-domestic interiors |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 lounge and office seating | Use back, seat, base, stability, and leg-strength tests appropriate to the actual work-seating classification | |
|---|---|---|
| ANSI/BIFMA X5.4 lounge seating | Use static and cyclic load guidance if the chair is classified as stationary lounge seating |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2 furniture test | Apply chair backrest strength and durability test methods for commercial seating acceptance | |
|---|---|---|
| GB/T 10357.3 furniture test | Apply chair seat strength and durability test methods using the specified cyclic-load target | |
| GB/T 28001 basis | Use occupational health and safety management criteria for workplace seating procurement review | |
| GB 28007 furniture safety | Use children's-furniture sharp-edge and entrapment concepts only if the chair is installed in family-accessible areas |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture test: Apply chair backrest strength and durability test methods for commercial seating acceptance; 2. GB/T 10357.3 furniture test: Apply chair seat strength and durability test methods using the specified cyclic-load target; 3. GB/T 28001 basis: Use occupational health and safety management criteria for workplace seating procurement review; 4. GB 28007 furniture safety: Use children's-furniture sharp-edge and entrapment concepts only if the chair is installed in family-accessible areas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool