Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	720 × 780 × 1180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight capacity	160 kg
Suggested user stature range	165 to 190 cm
Seating capacity	1 person
Net weight	24 kg
Static vertical base load reference	500 kg
Caster rolling durability reference	100,000 cycles
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rate	40%
Fabric or leather abrasion acceptance target	50,000 Martindale cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Dark brown smooth leather-look upholstery with stitched perimeter panels
Backrest upholstery	Padded dark brown upholstered panels with horizontal lumbar segmentation
Headrest	Integrated curved padded headrest covered in the same dark brown upholstery
Seat cushion	Molded polyurethane foam core at 100 mm nominal thickness under upholstery
Back cushioning	Dual-density polyurethane foam at 80 mm nominal shoulder thickness and 60 mm lumbar thickness
Inner back support	20 mm molded plywood or hardwood-composite support board bonded to the foam stack
Arm pads	Dark brown padded arm caps with soft rounded front edges over rigid arm supports
Arm side panels	Black molded side panels with bright chrome or polished-metal accent trim
Recline mechanism	Black steel multi-position tilt mechanism with visible under-seat control levers
Gas lift	Black external gas-lift cylinder with 50 mm tube and chrome taper collar
Five-star base	Wood-look laminated five-star base with black lower rails and bright edge trim
Casters	Black nylon twin-wheel swivel casters with hard-floor contact treads

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Swivel function	360-degree continuous swivel around the central gas-lift axis
Seat height adjustment	Pneumatic lift with 100 mm adjustment travel through the right-hand lever
Back recline	Synchronized tilt with 95 to 120 degree back angle range and multi-position lock
Tilt tension control	Rotating tension knob under the mechanism for user-weight resistance adjustment
Forward and backward mobility	Five-point rolling mobility using five 60 mm twin-wheel casters
Lumbar support	Structured segmented lower-back padding with fixed contour and no visible adjustable pump
Head support	Fixed integrated high head cushion supporting neck and upper back during recline
Arm support	Fixed padded armrests providing forearm support at 220 mm above the seat
Control access	Two side-facing under-seat levers allow seated height and tilt-lock operation
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive office	Suitable for directors and executives needing high-back support during 8-hour desk work
Manager workspace	Suitable for daily computer, meeting and telephone work at a 720 to 760 mm executive desk
Boardroom or meeting room	Provides a formal mobile seating option for conference rooms and private meeting spaces
Private consulting room	Suitable for professional consultation settings where appearance and prolonged seated comfort matter
Home executive office	Suitable for a dedicated home office with hard floors or a protective chair mat
Reception senior-station	Suitable behind reception or supervisor counters where seated users rotate between tasks
Recommended desk configuration	Pair with a 1600 x 800 mm or larger executive desk and 700 mm knee clearance
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1335-1 applicability	Use for office seating dimensional safety and structural terminology during design verification
EN 1335-2 applicability	Applicable standards and test results require confirmation
EN 1335-3 applicability	Use for office-chair structural test methods including back, seat and base loading
EN 1022 applicability	Use for seating stability verification when validating the 700 mm caster base

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1 applicability	Use for general-purpose office-chair safety, strength, durability and dimensional verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.3 applicability	Use for furniture strength and durability testing of office seating during purchaser verification
GB/T 3324 applicability	General wooden furniture technical requirements may apply to wood-composite or wood-look structural parts
GB 18584 applicability	Use for indoor wooden-furniture limited-release screening if wood-based panels are supplied
GB/T 27540 applicability	Use for office-chair information and basic functional selection in the purchasing file

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.3 applicability: Use for furniture strength and durability testing of office seating during purchaser verification;
2. GB/T 3324 applicability: General wooden furniture technical requirements may apply to wood-composite or wood-look structural parts;
3. GB 18584 applicability: Use for indoor wooden-furniture limited-release screening if wood-based panels are supplied;
4. GB/T 27540 applicability: Use for office-chair information and basic functional selection in the purchasing file;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · EXEC-HB-BRN-WB5-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · EXEC-HB-BRN-WB5-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · EXEC-HB-BRN-WB5-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The High-Back Brown Leather Executive Swivel Chair presents a formal executive profile with a tall, structured backrest, integrated curved headrest, padded seat, and supportive armrests. Its dark brown smooth leather-look upholstery is finished with stitched perimeter seat panels and horizontal segmentation in the lumbar region. Black molded arm side panels with bright chrome or polished-metal accent trim create a tailored contrast against the brown seating surfaces, while the wood-look five-star base with black trim reinforces the traditional office appearance. Overall dimensions are 720 x 780 x 1180 mm, with a 540 mm clear width between armrests. The chair is designed for one occupant and uses a five-point base with black nylon twin-wheel casters. Construction combines padded comfort with a visible mechanical structure. The seat features a molded polyurethane foam core with a nominal 100 mm thickness under the upholstery and a finished cushion thickness of 90 mm. Back cushioning uses dual-density polyurethane foam, with nominal 80 mm shoulder thickness and 60 mm lumbar thickness, while the finished backrest padding is 70 mm thick. A 20 mm molded plywood or hardwood-composite support board is bonded to the foam stack, and the fixed-contour lower-back zone is 240 mm high. Arm caps are padded with softly rounded front edges over rigid supports. The multi-position tilt mechanism and central gas lift are finished in black steel. Functionality is centered on executive desk use. The chair provides continuous 360-degree swivel movement, pneumatic seat-height adjustment through a right-hand lever, synchronized back recline from 95 to 120 degrees, and multi-position locking. A rotating tension knob under the mechanism lets users adjust tilt resistance. The fixed head cushion supports the neck and upper back during recline, and the segmented lumbar padding provides structured lower-back support without a visible adjustable pump. Five 60 mm twin-wheel casters support forward, backward, and lateral mobility around a workstation. This model is appropriate for director offices, manager workstations, boardrooms, private consulting rooms, senior reception or supervisor stations, and dedicated home executive offices. It suits professional settings where appearance, high-back support, and mobility are priorities. For residential use on hard floors, a protective chair mat is recommended. Procurement planning should note the unbranded model EXEC-HB-BRN-WB5a 160 kg recommended user weight capacity, a suggested user stature up to 190 cm, and a net weight of 24 kg. Each set ships in two cartons, with a reference assembly time of 40 minutes. Specification review should include fixed lumbar geometry, caster suitability for the intended floor, and compatibility with executive desk heights.

High-Back Brown Leather Executive Swivel Chair Specifications

Suppliers and stock