Product supplierHigh-Back Executive Swivel Chair in Beige Upholstery, Beige leather-look upholstery over 90 mm polyurethane foam with sewn horizontal cushion divisions
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 700 × 720 × 1250 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight | 150 kg | |
|---|---|---|
| Chair net weight | 21 kg | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam rebound | 40% | |
| Seat static load verification | 220 kg | |
| Caster rolling durability | 100000 cycles | |
| Gas-lift cycles | 100000 height-adjustment cycles | |
| Tilt mechanism fatigue target | 200000 recline cycles | |
| Recommended daily occupancy | 8 hours per user |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Beige leather-look upholstery over 90 mm polyurethane foam with sewn horizontal cushion divisions | |
|---|---|---|
| Back upholstery | Beige padded upholstery formed into three horizontal back zones with rounded top edge | |
| Outer side shell | Dark charcoal molded structural side shell wrapping the arm and back perimeter | |
| Armrest construction | Integrated curved arm with beige padded upper surface and dark molded outer support | |
| Internal seat carrier | 12 mm molded plywood or reinforced polymer seat board supported by the steel mechanism | |
| Back support frame | 15 mm reinforced molded back board bonded inside the upholstered shell | |
| Five-star base | Polished cast or extruded aluminum five-spoke base with five caster sockets | |
| Base wall section | 3.0 mm polished aluminum section | |
| Gas lift | 50 mm chrome-plated steel outer tube with black telescopic sleeve | |
| Tilt mechanism | Black powder-coated steel multi-function plate with two side control levers | |
| Casters | Black nylon or polyurethane twin-wheel swivel casters with steel mounting stems | |
| Seam construction | Single-needle horizontal seams at 90 mm pitch with matched beige thread |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| 360-degree swivel | Full 360-degree seat rotation around the central gas-lift axis | |
|---|---|---|
| Pneumatic height adjustment | 80 mm vertical seat-height travel controlled by the right-side lever | |
| Synchronized recline | Back recline range of 115degrees from upright with seat movement through the steel tilt plate | |
| Recline lock | Three-position lock at 95, 105, and 115 degrees | |
| Tilt tension control | Rotary knob adjusts spring resistance for users up to 150 kg | |
| Fixed integrated armrests | Curved non-flipping arm supports hold forearms at 230 mm above the seat | |
| Mobile five-star base | Five twin-wheel casters provide omnidirectional movement and a 700 mm stability diameter | |
| High-back torso support | 820 mm tall back provides shoulder, lumbar, and upper-back contact zones | |
| Deep-seat posture support | 500 mm seat depth and 520 mm seat width support upright executive desk work | |
| Hard-floor caster use | 60 mm soft-tread twin wheels are specified for wood, tile, and low-pile floor surfaces | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Use behind a 2000 mm executive desk where the beige high-back form matches a formal management room | |
|---|---|---|
| Boardroom or meeting room | Place around conference tables for directors or visitors requiring 4 hour meeting support | |
| Management workstation | Assign to supervisors and professionals using computers, documents, and video calls for an 8-hour shift | |
| Private consultation room | Use in law, finance, or consulting rooms where a polished appearance and cushioned arm support are required | |
| Hotel executive lounge | Suitable for business-center workstations and quiet lounge desks with hard-floor or low-pile surfaces | |
| Recommended desk height | 760 mm | |
| Recommended floor type | Hardwood, tile, vinyl, carpet tile, and low-pile carpet up to 8 mm | |
| Color planning | 1 visible beige color option with dark shell and polished aluminum base |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 applicability | Use for office chair dimensions, including seat height, depth, and adjustment geometry | |
|---|---|---|
| EN 1335-2 applicability | Use for office chair safety, strength, and durability acceptance testing | |
| EN 1335-3 applicability | Applicable standards and test results require confirmation | |
| EN 1022 applicability | Use for chair stability evaluation of front, rear, and side tipping | |
| EN 71-2 applicability | Use only when the project requires upholstered seating flammability screening for childcare environments |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 seat static load applicability | Use the static seat-load clause to verify the carrier, mechanism, and gas lift | |
|---|---|---|
| ANSI/BIFMA X5.4 applicability | Use for lounge or reclining seating requirements only if the chair is purchased as a recliner rather than a task chair |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 applicability | Use for chair strength and durability acceptance testing of seat, back, arms, and base | |
|---|---|---|
| GB/T 3324 applicability | Use for general wooden furniture dimensional and finish inspection where internal boards are used | |
| GB/T 19001 applicability | Use as the supplier quality management system requirement during procurement | |
| GB 17927 applicability | Use for upholstered furniture damage-producing fire safety assessment if project testing is specified |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 applicability: Use for chair strength and durability acceptance testing of seat, back, arms, and base; 2. GB/T 3324 applicability: Use for general wooden furniture dimensional and finish inspection where internal boards are used; 3. GB/T 19001 applicability: Use as the supplier quality management system requirement during procurement; 4. GB 17927 applicability: Use for upholstered furniture damage-producing fire safety assessment if project testing is specified; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool