Product supplierGrey Polypropylene Sled-Base Stackable Visitor Chair, One-piece injection-molded polypropylene (PP) copolymer, light grey matte finish, integrated lumbar boss
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 520 × 560 × 820 mm | |
|---|---|---|
| Seat width | 480 mm | |
| Seat depth | 420 mm | |
| Seat height (to top of seat cushion/shell) | 460 mm | |
| Backrest height (from seat to top of back) | 380 mm | |
| Backrest width | 470 mm | |
| Sled base width (outer) | 500 mm | |
| Sled base depth (front-to-back rail) | 540 mm | |
| Lumbar support projection depth | 70 mm | |
| Stackable pitch (per chair when nested) | 120 mm | |
| Backrest height (from seat surface to top of back) | 380 mm | |
| Sled base outer width | 500 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight (reference) | 5.5 kg | |
|---|---|---|
| Static load rating (reference) | 110 kg | |
| Stacking quantity (floor-stack reference) | 10 units | |
| Recommended maximum user weight | 110 kg | |
| Expected service life (commercial contract use reference) | 5 years | |
| Static load rating | 110 kg | |
| Maximum floor stacking quantity | 10 units | |
| Expected commercial service life | 5 years | |
| Shell impact resistance reference | 2.5 J | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back shell | One-piece injection-molded polypropylene (PP) copolymer, light grey matte finish, integrated lumbar boss | |
|---|---|---|
| Sled frame | Continuous tubular steel, chrome-plated bright finish, single bend per side | |
| Frame-to-shell fasteners | Injected plastic brackets with steel screws, mounted at rear seat/back junction | |
| Floor contact glides | Integrated plastic caps on both front and rear sled rail ends | |
| Shell surface texture | Fine matte grain with cleanly molded cut-out at lumbar opening | |
| Lumbar support structure | Integrally molded PP rib/pad, cantilevered from back shell side webs | |
| Rear back cut-out edge | Smooth molded PP rim with 3 mm minimum radius on all cut edges to prevent sharp contact | |
| Sled frame weld joints | Hidden internal butt welds at front and rear rail bends, ground smooth prior to chrome plating | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Stacking capability | Multiple chairs nest vertically by sliding the sled base of the upper chair over the seat shell of the lower chair, saving storage floor space | |
|---|---|---|
| Fixed seating height | Seat height is non-adjustable at a standard visitor-chair sitting level, suitable for general-purpose guest and meeting use | |
| Integrated lumbar support | Molded forward-projecting pad within the backrest cut-out provides continuous lower-back contact in upright posture | |
| Sled-base stability | Closed-loop tubular steel runners distribute load across front and rear contact points, reducing rocking and limiting tipping compared to four-leg chairs | |
| Floor protection | Plastic end caps on the sled rails allow sliding on hard floors while minimizing scratch damage to laminate, tile or wood surfaces | |
| Maintenance and wipe-down suitability | Smooth non-porous PP shell with minimal crevices supports quick surface cleaning with common disinfectants in office, education or clinic settings | |
| Space-efficient footprint | Compact 520 mm width and 560 mm depth allow dense seating arrangements in meeting rooms, training rooms and waiting areas without compromising shoulder room | |
| Vertical stacking | Chairs nest vertically by sliding the sled base of the upper chair over the seat shell of the lower chair, reducing required storage floor space | |
| Wipe-down maintenance | Smooth non-porous PP shell with minimal crevices supports surface cleaning with common disinfectants for office, education or clinic use | |
| Compact footprint seating | 520 mm overall width and 560 mm depth allow dense seating arrangements in meeting rooms, training rooms and waiting areas while maintaining standard shoulder clearance | |
| Stack carry handle | Central back cut-out doubles as a grip handle for lifting and moving stacked chairs during room reconfiguration | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packaging configuration (reference) | 4 chairs per export carton | |
|---|---|---|
| Carton dimensions (reference) | 1100 x 600 x 880 mm | |
| Gross weight per carton (reference) | 24 kg | |
| Volume per carton (reference) | 0.58 CBM | |
| Assembly time per chair | 10 minutes | |
| Unit per export carton | 4 chairs per export carton | |
| Carton dimensions | 1100 x 600 x 880 mm | |
| Gross weight per carton | 24 kg | |
| Volume per carton | 0.58 CBM | |
| Assembly time per unit | 10 minutes |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office visitor and reception areas | Suitable for reception lounges and visitor zones in corporate offices, where a wipe-clean surface and space-saving stacking storage are valued | |
|---|---|---|
| Meeting and conference rooms | Suitable for fixed or flexible conference seating layouts, with a neutral light-grey finish that fits modern office interiors | |
| Training and education spaces | Suitable for training rooms and classrooms requiring frequent reconfiguration and dense stacking storage between sessions | |
| Clinic and public service waiting areas | Suitable for healthcare and public service waiting rooms where smooth, easily sanitized seating surfaces are preferred | |
| Cafeteria and break-out areas | Suitable for staff break rooms and light-use cafeteria seating, with water-resistant plastic shell and easy wipe-down cleaning | |
| Corporate office reception areas | Suitable for visitor lounges and reception zones in corporate offices, where wipe-clean surfaces and space-saving stacking storage are required for variable visitor volume | |
| Cafeteria and staff break areas | Suitable for staff break rooms and light-use cafeteria seating, with water-resistant plastic shell and easy wipe-down cleaning for food service areas | |
| Event and temporary function spaces | Suitable for temporary event seating and function halls, where quick setup, teardown and compact off-site storage are operational priorities |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Office furniture – chairs – requirements for safety, strength and durability | Recommended references: EN 16139:2019 | |
|---|---|---|
| Safety of furniture – seating – test methods for stability | EN 1022 can be referenced when specifying tipping-resistance acceptance criteria for sled-base side chairs | |
| Office chairs safety, strength and durability | EN 16139:2019 is recommended as a reference standard for contract use visitor chair performance evaluation | |
| Furniture seating stability test methods | EN 1022:2018 can be referenced when specifying tipping-resistance acceptance criteria for sled-base side chairs | |
| Furniture upholstery and surfaces cleaning | EN 16716:2016 may be referenced for wipe-clean surface performance validation for public seating |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| General purpose office chairs – tests | ANSI/BIFMA X5.1 can be referenced for strength, durability and stability acceptance criteria when this chair is procured for office visitor use |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| General technical requirements for public seating | GB/T 3325 applies as a reference for metal furniture strength, durability and stability during procurement acceptance | |
|---|---|---|
| Plastic furniture safety evaluation | GB 28481 can be used as a reference for evaluating plastic parts in multipurpose and household furniture when specified in the purchase contract | |
| Metal furniture general technical requirements | GB/T 3325 applies as a reference for metal frame strength, durability and stability during procurement acceptance | |
| Plastic furniture safety specification | GB 28481 can be referenced for evaluating plastic part safety and material requirements when specified in the purchase contract | |
| Furniture seating test methods | GB/T 10357.2 may be used as reference for seat and back strength testing during incoming inspection |
Standardized tender description text
This product must meet the following technical requirements: 1. General technical requirements for public seating: GB/T 3325 applies as a reference for metal furniture strength, durability and stability during procurement acceptance; 2. Plastic furniture safety evaluation: GB 28481 can be used as a reference for evaluating plastic parts in multipurpose and household furniture when specified in the purchase contract; 3. Metal furniture general technical requirements: GB/T 3325 applies as a reference for metal frame strength, durability and stability during procurement acceptance; 4. Plastic furniture safety specification: GB 28481 can be referenced for evaluating plastic part safety and material requirements when specified in the purchase contract; 5. Furniture seating test methods: GB/T 10357.2 may be used as reference for seat and back strength testing during incoming inspection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool