| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 2200 x 1050 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total product net weight | 115 kg | |
|---|---|---|
| Maximum static mattress load | 350 kg | |
| Slat system distributed load capacity | 500 kg | |
| Recommended mattress thickness | 300 mm | |
| Surface fabric abrasion resistance | 30000 cycles | |
| Frame joint static load durability | 10000 cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer bed frame upholstery | Beige smooth faux leather, 1.2mm thickness, stitched panel seams | |
|---|---|---|
| Headboard padded front/armrests | Dark brown woven fabric upholstery over high-density foam | |
| Internal bed frame | Kiln-dried solid pine lumber, 30mm section thickness | |
| Mattress support platform | 12mm thick plywood slat base, 60mm wide slats, 50mm gap | |
| Headboard padding core | 35kg/m3 high-resilience polyurethane foam, 120mm thickness | |
| Frame joint hardware | Zinc-plated steel corner brackets, 5mm thickness, bolted assembly | |
| Lower base protective padding | 3mm thick non-woven fabric dust cover under bed base | |
| Seam construction | Reinforced polyester stitching, 8 stitches per inch, edge piping | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support | Fixed platform slat base, no box spring required for use | |
|---|---|---|
| Assembly design | Knockdown bolted assembly, 4 main frame sections joined with hardware | |
| Headboard design | Fixed curved wing headboard with rolled armrests, padded back support | |
| Mattress retention | Raised upholstered lip around mattress platform perimeter | |
| Center support | Full-length central support rail running head to foot of bed | |
| Under-bed design | Enclosed upholstered base with minimal floor clearance, no under-bed storage | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary residential application | Master bedrooms in residential apartments and homes | |
|---|---|---|
| Interior style compatibility | Contemporary, minimalist and luxury soft decor schemes | |
| Recommended matching setup | Pairs with low-profile nightstands and upholstered seating | |
| Ceiling height suitability | Works in rooms with 2400mm or higher finished ceiling height | |
| Target user group | Adult residential users seeking soft, padded bedroom furniture |
EU Market Access Requirements* EN Standards
| Domestic beds safety requirements | EN 747:2012+A1:2015 |
|---|
Standards applicable to China-market projects
| Residential furniture structural safety | GB/T 3324 | |
|---|---|---|
| Upholstered furniture harmful substance limits | GB 18584 |
This product must meet the following technical requirements: 1. Residential furniture structural safety: GB/T 3324; 2. Upholstered furniture harmful substance limits: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
