| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (with side nightstands) | 3353 x 2210 x 1118 mm | |
|---|---|---|
| Sleeping surface (king size) | 1930 x 2030 mm | |
| Headboard height | 1118 mm | |
| Bed frame platform height (floor to slat top) | 305 mm | |
| Recommended mattress thickness | 305 mm | |
| Under-bed clearance (floor to frame bottom) | 203 mm | |
| Side nightstand shelf projection from headboard | 406 mm | |
| Glass nightstand shelf height above mattress | 203 mm | |
| Walnut storage tier height above floor | 356 mm | |
| Reading lamp mounting height above mattress | 762 mm | |
| Slat width | 70 mm | |
| Slat spacing | 76 mm | |
| Leg diameter (chrome support) | 32 mm | |
| Lampshade dimensions | 178 x 254 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity | 363 kg | |
|---|---|---|
| Product net weight | 70 kg | |
| Number of occupants supported | 2 | |
| Nightstand shelf static load per unit | 15 kg | |
| Center support leg count | 3 | |
| Slat total count | 28 | |
| Noise reduction fastener rating | 10000 cycles | |
| Wall mounting bracket load capacity per side | 25 kg | |
| LED reading lamp lumen output per unit | 350 lm | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard outer layer | Woven beige linen blend upholstery | |
|---|---|---|
| Headboard padding | 25mm high-density polyurethane foam | |
| Internal bed frame core | 18mm plywood and MDF engineered wood | |
| Bed base perimeter frame | Polished chrome-plated steel tube | |
| Lower nightstand storage tiers | Walnut veneer over MDF with matte finish | |
| Upper nightstand shelves | 10mm frosted tempered glass | |
| Swing-arm hardware | Polished chrome-plated solid steel | |
| Support slats | 12mm solid poplar wood | |
| Reading lamp shades | Pleated off-white linen fabric | |
| Connector hardware | Zinc-plated steel bolts and cam locks | |
| Anti-slip mattress pad | 3mm non-woven polyester fabric | |
| Foot caps | Non-marking black TPE plastic |
Adjustment / rotation / tilt / mobility / storage features
| Swing-arm nightstand adjustment | 180° horizontal rotation for custom bedside positioning | |
|---|---|---|
| Integrated reading lamp operation | 350lm warm white LED output with independent on/off switch per side | |
| Mattress support system | Wood slat platform with center bracing, no box spring required | |
| Stacked nightstand storage | Two-tier storage per side: upper glass shelf for drinks/phones, lower walnut tier for books/accessories | |
| Noise reduction feature | Velcro-fixed slats to eliminate frame creaking during movement | |
| Under-bed access | 203mm open clearance for robotic vacuum cleaning and low-profile storage items | |
| Wall anchor system | Included wall attachment brackets to prevent headboard tipping | |
| Assembly requirement | Two-person adult assembly with included hex key and hardware | |
| Lampshade orientation adjustment | 30° vertical tilt for targeted reading light direction | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Primary residential bedrooms | |
|---|---|---|
| Target user group | Adult consumers seeking all-in-one bedroom furniture without separate nightstands | |
| Recommended room size | Minimum 3.6m x 4.0m bedroom | |
| Style compatibility | Modern, contemporary, and minimalist bedroom interiors | |
| Recommended complementary furniture | Low-profile dressers and wardrobes in walnut or chrome finishes | |
| Practical use benefit | Ideal for compact primary bedrooms where space for separate nightstands is limited | |
| Installation requirement | Headboard mounted against finished wall with power access nearby |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses: safety requirements, applicable to structural stability | |
|---|---|---|
| EN 1022:2018 | Domestic furniture - Seating and beds: determination of stability, applicable to tip-over prevention | |
| EN 12520:2015 | Furniture - Strength, durability and safety: requirements for domestic seating, applicable for edge load testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to engineered wood frame components | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials: limit of harmful substances in wood furniture, applicable to veneer and board components | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture: beds, applicable to upholstered headboard and platform assembly |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to engineered wood frame components; 2. GB 18584-2001: Indoor decorating and refurbishing materials: limit of harmful substances in wood furniture, applicable to veneer and board components; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture: beds, applicable to upholstered headboard and platform assembly; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
