| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 2200 x 1050 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total bed frame weight | 78 kg | |
|---|---|---|
| Static weight capacity (mattress + users) | 500 kg | |
| Slat spacing | 70 mm | |
| Number of support slats | 14 | |
| Recommended maximum user weight per person | 150 kg | |
| Warranty period for frame | 5 years | |
| Available upholstery color options | 3 | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Matte faux leather with soft grain surface | |
|---|---|---|
| Headboard padding | 35mm thick 35kg/m³ high-density polyurethane foam | |
| Side rail upholstery | Matching matte faux leather over 15mm MDF substrate | |
| Support slats | 12mm thick solid pine wood slats | |
| Support legs | 20mm diameter matte black carbon steel legs | |
| Internal frame | 30x30mm square steel tube frame under upholstered rails | |
| Hardware fasteners | Zinc-plated steel bolts and barrel nuts | |
| Edge stitching | 10 stitches per 100mm uniform upholstery stitching | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Box spring compatibility | No box spring required, slatted base directly supports mattress | |
|---|---|---|
| Headboard function | Two-section padded headboard provides upright back support for sitting in bed | |
| Under-bed access | 120mm clearance allows robot vacuum and regular cleaning under frame | |
| Assembly structure | Knock-down design with bolted connections for headboard, side rails and slat base | |
| Mattress retention | Integrated side rail lips prevent mattress sliding during use | |
| Noise reduction design | Felt pads between slats and metal frame reduce movement squeaks | |
| Wall alignment | Flat back panel on headboard sits flush against standard walls | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Master bedroom use | Fits modern, minimalist or Scandinavian residential master bedrooms | |
|---|---|---|
| Guest room application | Suitable for medium-sized guest rooms for 2 adult users | |
| Small apartment use | Low-profile frame saves vertical space in compact urban bedrooms | |
| Matching furniture pairing | Pairs with matching two-drawer gray nightstands as shown in scene | |
| Recommended mattress pairing | Pairs with 300 mm thick memory foam, latex or spring mattresses |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 12520:2015 | Domestic furniture - Seating - Strength, durability and safety requirements for bed headrests |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame and structural stability | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control | |
| GB/T 16799-2008 | Furniture upholstery leather specifications, applicable for faux leather upholstery performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame and structural stability; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission control; 3. GB/T 16799-2008: Furniture upholstery leather specifications, applicable for faux leather upholstery performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
