| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (king size) | 2140 x 2040 x 1330 mm | |
|---|---|---|
| Headboard height | 1330 mm | |
| Floor to top of mattress platform | 250 mm | |
| Underbed storage compartment height | 300 mm | |
| Ground clearance under frame | 40 mm | |
| Recommended mattress thickness | 406 mm | |
| Matching nightstand dimensions | 500 x 400 x 550 mm | |
| Wing extension depth from headboard face | 120 mm | |
| Slat width | 70 mm | |
| Slat thickness | 25 mm | |
| Slat spacing | 75 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static load capacity | 454 kg | |
|---|---|---|
| Recommended number of users | 2 | |
| Net weight (frame only) | 100 kg | |
| Slat system static point load | 120 kg | |
| Hydraulic lift cycle rating | 10000 open/close cycles | |
| Upholstery abrasion resistance | 30000 Martindale cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Linen-look woven fabric | |
|---|---|---|
| Headboard padding | 30mm thick high-resilience polyurethane foam | |
| Side rail/footboard upholstery | Matching off-white woven fabric | |
| Internal bed frame | 18mm thick plywood + 1.2mm thick steel square tube reinforcement | |
| Support slats | Solid pine wood slats | |
| Support legs | 20mm diameter black powder-coated steel legs | |
| Lift mechanism hardware | Class 2 gas hydraulic struts with reinforced steel hinges | |
| Storage compartment base | Non-woven fabric dust cover lining | |
| Hardware connectors | Zinc-plated steel bolts and barrel nuts | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| Lift-up underbed storage | Hydraulic gas strut assisted platform lifts from foot end to access full underbed cavity | |
|---|---|---|
| Anti-slide mattress retention | Metal stopper at head end of platform prevents mattress shifting during lift | |
| No box spring required | Solid wood slat platform directly supports standard mattresses | |
| Soft-close lift mechanism | Controlled hydraulic lowering prevents slamming of the mattress platform | |
| Wingback headboard support | Curved upholstered wings provide side draft blocking and seated back support | |
| Knockdown assembly | Frame disassembles into flat-packed sections for transport | |
| Noise damping | EVA foam pads at slat and frame joints reduce squeaking during use | |
| Nightstand storage (matching set option) | Two soft-close drawers per matching upholstered nightstand | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions (master) | 2200 x 1300 x 350 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | King size platform fits 3.5m+ wide bedroom layouts for primary sleeping use | |
|---|---|---|
| Small-space urban apartments | Integrated underbed storage eliminates need for separate dressers or storage chests | |
| Modern light luxury interior schemes | Off-white curved wingback design pairs with neutral, contemporary or minimalist decor | |
| Matching bedroom set configurations | Coordinates with paired 2-drawer upholstered nightstands for coordinated room design | |
| Users preferring low-profile beds | Low platform height provides easy access for adults without high step-over |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture beds and mattresses safety and strength requirements | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test applicable to bed edge use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to frame strength and finish | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture mattresses/bed frames |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame strength and finish; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture mattresses/bed frames; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
