| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (mattress fit) | 1800 x 2200 x 1180 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Bed frame net weight (reference) | 85 kg | |
|---|---|---|
| Total static weight capacity | 500 kg | |
| Slat center support static load per slat | 60 kg | |
| Recommended number of users | 2 | |
| Upholstery seam durability (reference) | 10000 abrasion cycles | |
| Frame joint structural warranty (reference) | 5 years | |
| Floor protection rating | Non-marking foot pads | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | White faux leather (PU) with stitched segmented padding | |
|---|---|---|
| Headboard internal frame | 25mm thick solid pine wood framing | |
| Headboard padding | 35kg/m3 density high-resilience polyurethane foam | |
| Bed side rails and footboard | White faux leather upholstery over 18mm plywood substrate | |
| Support legs | 1.5mm thick black powder-coated carbon steel | |
| Bed slat base | 12mm thick poplar wood slats with fabric webbing | |
| Decorative headboard accents | Brushed gunmetal metal trim inserts | |
| Leg foot pads | 30mm diameter non-slip rubber pads | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Back support for upright sitting | Dual-layer padded headboard with lumbar-aligned lower section | |
|---|---|---|
| Mattress ventilation | Open slatted base with 30mm gaps between slats | |
| Mattress retention | Recessed side rail lip 20mm above slat surface | |
| Floor cleaning access | 120mm under-bed clearance | |
| Noise reduction design | Fabric-connected slats with rubber slat holders | |
| Assembly structure | Knock-down bolted rail-to-headboard connection | |
| Weight distribution | Center support rail with two additional middle legs | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | Suits 25sqm modern or light luxury style bedrooms as primary sleeping furniture | |
|---|---|---|
| Guest bedroom accommodation | Fits standard guest rooms for comfortable double occupancy for visiting family or guests | |
| Matching furniture set | Pairs with low-profile white two-drawer nightstands of 500mm width for coordinated bedroom layout | |
| Upholstered headboard use case | Ideal for users who regularly read or work on portable devices in bed | |
| Hardwood/tile floor compatibility | Non-marking leg pads prevent floor damage in rooms with hard finished flooring | |
| Low-profile aesthetic application | Works in rooms with lower ceiling heights to avoid visual overcrowding from tall bed frames |
EU Market Access Requirements* EN Standards
| Domestic bed safety requirements | EN 747:2012+A1:2015 | |
|---|---|---|
| Upholstered furniture durability | EN 1725:1998 | |
| Formaldehyde emission from wood panels | EN 13986:2004 |
Standards applicable to China-market projects
| Residential bed structural safety | GB/T 3324 | |
|---|---|---|
| Upholstered furniture formaldehyde limit | GB 18584 | |
| Upholstered furniture flame retardancy | GB 20286 |
This product must meet the following technical requirements: 1. Residential bed structural safety: GB/T 3324; 2. Upholstered furniture formaldehyde limit: GB 18584; 3. Upholstered furniture flame retardancy: GB 20286; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
