| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1980 x 2400 x 1220 mm | |
|---|---|---|
| Recommended mattress size | 1800 x 2000 mm | |
| Headboard padded thickness | 180 mm | |
| Side/foot rail height from floor | 350 mm | |
| Under-bed ground clearance | 120 mm | |
| Side rail padded thickness | 100 mm | |
| Foot rail width | 220 mm | |
| Mattress retention lip height | 50 mm | |
| Slat count | 14 units | |
| Slat spacing gap | 70 mm | |
| Individual slat thickness | 20 mm | |
| Center support leg count | 5 units | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 363 kg | |
|---|---|---|
| Recommended maximum mattress thickness | 360 mm | |
| Net product weight | 59 kg | |
| Frame joint cyclic durability | 10000 cycles | |
| Upholstery abrasion resistance | 30000 Martindale cycles | |
| Foam padding density | 55 kg/m³ | |
| Foam rebound rate | 45% | |
| Maximum supported user weight per side | 180 kg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Grey soft woven velour fabric | |
|---|---|---|
| Side/foot rail upholstery | Matching grey velour fabric | |
| Internal frame material | Kiln-dried eucalyptus hardwood | |
| Padding material | High-density polyurethane foam | |
| Support legs | Dark powder-coated carbon steel | |
| Slat support system | Steam-bent birch wood slats | |
| Connecting hardware | Zinc-plated rust-resistant steel bolts | |
| Noise reduction pads | Felt anti-slip pads | |
| Fabric finish | Stain-repellent treated surface | |
| Foot glides | Non-marking plastic floor protectors | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| Support system function | Full slat platform eliminates need for box spring | |
|---|---|---|
| Center reinforcement function | Steel cross rail with additional support legs | |
| Assembly configuration | Knock-down assembly with all included hardware | |
| Noise reduction design | Felt-lined slat mounts eliminate frame squeak | |
| Headboard support function | Integrated fixed tall padded headboard | |
| Rounded edge design | Soft padded rounded corners on foot/side rails | |
| Mattress retention design | Raised inner lip on all four side rails | |
| Floor protection function | Non-marking glides on all leg bases | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary residential use | Master or guest bedroom spaces | |
|---|---|---|
| Style compatibility | Modern minimalist, light luxury, contemporary bedroom interiors | |
| Coordinating furniture | Matching grey 2-drawer upholstered nightstands as shown in image | |
| User suitability | Adult couples or single sleepers seeking soft padded bedroom furniture | |
| Floor type suitability | Hardwood, tile, laminate or low-pile carpeted floors | |
| Mattress compatibility | Memory foam, latex, spring or hybrid mattresses up to 360mm thick | |
| Space requirement | Minimum 2500 x 3000 mm bedroom footprint |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture – Beds and mattresses – Safety requirements, applicable for residential use | |
|---|---|---|
| EN 1022:2018 | Domestic furniture – Seating/bed stability test methods for structural validation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for wooden interior furniture, mandatory for frame materials | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture (soft beds) | |
| GB 20400-2006 | Leather/fabric safety specification for upholstered furniture upholstery |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame; 2. GB 18584-2001: Formaldehyde emission limit for wooden interior furniture, mandatory for frame materials; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture (soft beds); 4. GB 20400-2006: Leather/fabric safety specification for upholstered furniture upholstery; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
