| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (Queen size reference) | 2170 x 1690 x 1020 mm | |
|---|---|---|
| Mattress fit size | 1600 x 2000 mm | |
| Headboard panel width (each split cushion) | 820 mm | |
| Floor to slat support height | 280 mm | |
| Under-bed clearance (floor to rail bottom) | 200 mm | |
| Headboard cushion thickness | 120 mm | |
| Side rail width (extended ledge) | 45 mm | |
| Leg diameter/width | 30 mm | |
| Recommended mattress thickness | 300 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity | 590 kg | |
|---|---|---|
| Slat spacing | 76 mm | |
| Number of support slats | 28 | |
| Center support leg count | 3 | |
| Assembly time | 60 minutes | |
| Product net weight | 62 kg | |
| Upholstery abrasion resistance | 50000 cycles | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Light taupe faux leather or woven polyester fabric | |
|---|---|---|
| Headboard padding | 35 kg/m³ high-density polyurethane foam | |
| Internal frame | 18 mm thick plywood and engineered hardwood | |
| Support slats | 12 mm thick bentwood plywood slats | |
| Support legs | Chrome-plated square steel tube, 1.5 mm wall thickness | |
| Side rails | Upholstered plywood frame with matching taupe covering | |
| Hardware connectors | Zinc-plated steel bolts and barrel nuts | |
| Noise reduction pads | EVA rubber pads at slat and leg contact points | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Support system | Wood slat platform with center support beam, no box spring required | |
|---|---|---|
| Assembly method | Knock-down flat pack, included hex key and hardware | |
| Headboard design | Two independent split padded cushions, fixed height | |
| Extended side rail ledge | Narrow overhanging edge along perimeter, no storage function | |
| Under-bed access | 200 mm clearance for robot vacuum access and light cleaning | |
| Mattress retention | Raised slat frame lip to prevent mattress sliding | |
| Leg finish | Polished chrome plated surface with non-slip floor glides | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedroom | Modern minimalist design fits contemporary neutral-tone bedroom interiors | |
|---|---|---|
| Apartment and urban living spaces | Low-profile silhouette fits rooms with lower ceiling heights | |
| Hotel guest room furnishing | Neutral taupe finish and durable construction suitable for hospitality use | |
| Pairing recommendation | Works with low-profile modern nightstands in matching metal or light wood finish | |
| User group | Adult sleepers preferring soft upholstered headboard support without bulky footboard | |
| Floor compatibility | Suitable for hard wood, tile and low-pile carpeted floors with included glides |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses, safety and strength requirements | |
|---|---|---|
| EN 1022:2005 | Domestic furniture - Seating, applicable to headboard structural stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural frame safety | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde emission | |
| GB/T 1952.2-2011 | General technical requirements for upholstered furniture, applicable to mattress support performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural frame safety; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission; 3. GB/T 1952.2-2011: General technical requirements for upholstered furniture, applicable to mattress support performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
