| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1930 x 2220 x 1110 mm | |
|---|---|---|
| mattress compatibility | 1800 x 2000 mm | |
| headboard height | 1110 mm | |
| sleeping surface height | 350 mm | |
| side rail thickness | 130 mm | |
| foot rail height | 350 mm | |
| headboard thickness | 180 mm | |
| corner radius | 80 mm | |
| under-bed clearance | 30 mm | |
| headboard recess gap | 50 mm | |
| slat width | 70 mm | |
| slat spacing | 70 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| total static weight capacity | 500 kg | |
|---|---|---|
| product net weight | 70 kg | |
| recommended mattress thickness | 300 mm | |
| slat static load rating | 30 kg per slat | |
| number of support slats | 26 | |
| center support leg count | 5 | |
| upholstery abrasion resistance | 30000 double rubs | |
| foam indentation load deflection | 35 ILD | |
| foam density | 30 kg/m³ | |
| limited structural warranty | 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| outer upholstery | Woven camel-brown polyester-linen blend fabric | |
|---|---|---|
| headboard padding | 30 kg/m³ high-resilience polyurethane foam | |
| rail padding | 30 kg/m³ high-resilience polyurethane foam | |
| internal frame core | 18 mm thick CARB P2 grade MDF and plywood panels | |
| support slats | 12 mm thick solid poplar wood slats | |
| center support beam | 40 x 60 mm laminated pine wood rail | |
| support legs | 30 mm diameter black polypropylene glide feet | |
| connecting hardware | Zinc-plated steel bolts and barrel nuts | |
| stitching details | High-tenacity polyester thread, 8 stitches per inch | |
| headboard recess liner | Black non-woven fabric backing | |
| corner reinforcement | Triangular plywood gussets at all rail joints | |
| Slat Thickness | 15 mm bent plywood or solid timber |
Adjustment / rotation / tilt / mobility / storage features
| mattress support system | Fixed wooden slat platform with center beam | |
|---|---|---|
| edge design | Fully padded rounded corners on all frame edges | |
| assembly structure | Knock-down flat-pack design with pre-drilled holes | |
| glide adjustment | 10 mm height adjustment range on feet | |
| headboard integration | Fixed attached upholstered headboard | |
| upholstery care | Spot-clean only with mild upholstery detergent | |
| under-bed design | Solid upholstered base with minimal clearance | |
| seam construction | Stitched brick grid panel detailing | |
| noise reduction | Felt pads between slats and frame rails | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| residential master bedroom | Suitable for king size bedroom layouts as primary sleeping furniture for two adults | |
|---|---|---|
| boutique hotel guest rooms | Matches warm retro aesthetic for upscale short-stay accommodation interiors | |
| modern retro interior schemes | Complements warm camel and earth tone decor palettes with soft rounded silhouettes | |
| low-profile design preference | Ideal for spaces where low, grounded furniture creates an open visual feel | |
| child-safe bedroom environments | Soft rounded padded edges reduce injury risk for family bedrooms | |
| platform mattress setups | Optimized for use with all-foam or hybrid mattresses without additional foundation |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Applicable safety and strength standard for domestic bedroom beds | |
|---|---|---|
| EN 71-3:2019 | Applicable migration of certain elements for furniture used in residential spaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to wooden furniture general technical requirements for domestic bedroom use | |
|---|---|---|
| GB 18580-2017 | Applicable formaldehyde emission limit for engineered wood frame components | |
| GB/T 1952.2-2011 | Applicable general technical requirements for upholstered furniture bed products |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to wooden furniture general technical requirements for domestic bedroom use; 2. GB 18580-2017: Applicable formaldehyde emission limit for engineered wood frame components; 3. GB/T 1952.2-2011: Applicable general technical requirements for upholstered furniture bed products; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
