| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (Queen size) | 1630 x 2170 x 1280 mm | |
|---|---|---|
| Headboard height | 1280 mm | |
| Under-bed clearance | 244 mm | |
| Sleeping surface (mattress fit) | 1530 x 2030 mm | |
| Side rail height (from slat surface to top of rail) | 320 mm | |
| Headboard padding thickness | 76 mm | |
| Metal leg diameter | 20 mm | |
| Wing protrusion (headboard side extension) | 100 mm | |
| Recommended mattress thickness | 305 mm | |
| Slat width | 70 mm | |
| Slat spacing | 76 mm | |
| Center support rail height | 240 mm | |
| Side Rail Thickness | 40 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity | 454 kg | |
|---|---|---|
| Net product weight | 54 kg | |
| Center support leg load rating | 113 kg per leg | |
| Recommended user weight per sleeper | 159 kg | |
| Upholstery abrasion resistance (recommended spec) | 30000 double rubs | |
| Foam padding density (headboard) | 32 kg/m³ | |
| Frame static load cycle rating | 10000 load cycles | |
| Foam rebound rate | 45% | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Linen-look woven polyester fabric, gray finish | |
|---|---|---|
| Headboard padding | High-density polyurethane foam | |
| Internal frame structure | Engineered pine and plywood composite | |
| Mattress support slats | 12 mm thick birch plywood slats | |
| Support legs | Matte black powder-coated carbon steel | |
| Side and foot rails | Upholstered engineered wood frame, matching gray fabric | |
| Stitching detail | High-tensile polyester contrast thread, light gray tone | |
| Hardware components | Zinc-plated steel bolts and barrel nuts | |
| Slat noise damping | Non-slip EVA foam padding on slat contact points | |
| Leg base pads | Non-scratch rubber floor protectors | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support system | Fixed wood slat platform, no box spring required | |
|---|---|---|
| Headboard support | Fixed wingback headboard with padded panels, suitable for seated back support when reading in bed | |
| Assembly structure | Knock-down bolted assembly, all required hardware included | |
| Under-bed space | Open clearance for storage bins or robotic vacuum access | |
| Slat retention | Slats secured with Velcro strips to side rails to prevent shifting or squeaking during use | |
| Center support system | One full-length center rail with three support legs for even weight distribution across mattress surface | |
| Headboard mounting | Dual-height adjustable mounting positions to accommodate varying mattress thicknesses | |
| Foot rail design | Low-profile upholstered foot rail that eliminates sharp edges and supports foot of mattress | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary residential use | Master or guest bedrooms in modern, contemporary, or minimalist interior settings | |
|---|---|---|
| Mattress compatibility | Compatible with 300 mm thick memory foam, latex, hybrid, or innerspring mattresses | |
| User suitability | Suitable for two adult sleepers in permanent residential installations | |
| Coordination recommendation | Pairs with matching low-profile 2-drawer upholstered nightstands as shown in reference imagery | |
| Flooring suitability | Suitable for hardwood, laminate, carpet, or tile floors with included rubber leg pads | |
| Space requirement | Requires minimum 600mm clearance on sides and foot of bed for easy access and room circulation | |
| Care and maintenance | Suitable for regular vacuum cleaning of upholstery and spot cleaning for fabric stains |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods, structural safety standard for residential beds | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture - Ignitability - smouldering cigarette test, fabric flammability minimum requirement |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to engineered wood frame components | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, formaldehyde emission requirement for frame panels | |
| GB/T 19821-2005 | Upholstered furniture general technical requirements, applicable to fabric and foam padding components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to engineered wood frame components; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, formaldehyde emission requirement for frame panels; 3. GB/T 19821-2005: Upholstered furniture general technical requirements, applicable to fabric and foam padding components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
