| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2080 x 2200 x 1210 mm | |
|---|---|---|
| Headboard height | 1210 mm | |
| Recommended mattress thickness | 360 mm | |
| Platform height from floor (top of slat base) | 350 mm | |
| Under-bed floor clearance | 150 mm | |
| Side rail thickness | 60 mm | |
| Split headboard cushion dimensions per piece | 980 x 600 x 120 mm | |
| Headboard outer trim width | 100 mm | |
| Support leg diameter | 12 mm | |
| Slat width | 70 mm | |
| Slat spacing | 70 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static load capacity | 363 kg | |
|---|---|---|
| Net weight (king size) | 60 kg | |
| Slat system static load rating | 400 kg | |
| Recommended user weight per side | 150 kg | |
| Headboard cushion compression recovery rate | 92% | |
| Under-bed clearance load for storage | 30 kg | |
| Frame structural durability | 10 year service life | |
| Seam stitch tensile strength | 120 N | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard outer frame upholstery | Taupe faux leather, 1.2mm thickness, matte finish | |
|---|---|---|
| Headboard cushion and side rail upholstery | Grey woven textured fabric, 380g/sqm weight | |
| Headboard cushion fill | 35kg/m3 high-density polyurethane foam | |
| Inner support frame | 18mm thick solid pine + 15mm multi-layer engineered board | |
| Slat support base | 20mm thick solid pine slats, covered with non-woven silent fabric | |
| Support legs | 12mm diameter matte black carbon steel pin legs, with non-slip floor glides | |
| Hardware connectors | Zinc-plated steel bolts and barrel nuts, M8 size | |
| Strap fasteners for headboard cushions | Matching woven fabric straps, 40mm width | |
| Upholstery backing | 5mm thick non-woven fabric lining | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support system | Wooden slat platform, no box spring required | |
|---|---|---|
| Headboard cushion installation | Two split cushions secured via removable fabric straps | |
| Under-bed access | 150mm open clearance with no floor-mounted center rail obstruction | |
| Assembly method | Knock-down flat pack design, bolt-together construction | |
| Edge support | Reinforced upholstered side rails prevent mattress edge sag | |
| Noise reduction | Silent fabric layer between slats and frame minimizes movement noise | |
| Floor protection | Non-marking plastic glides on each metal leg | |
| Positioning design | Wall-aligned headboard with flat rear surface | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Residential master bedrooms | Suitable for king size layout in modern minimalist or contemporary interior designs | |
|---|---|---|
| Urban apartment bedrooms | Low-profile slim leg design creates visual space in smaller rooms | |
| Hotel guest rooms | Durable upholstery and robust frame fits boutique hospitality use | |
| Secondary bedrooms and guest suites | Available in double/queen size configurations for flexible room planning | |
| Matching furniture coordination | Pairs with low-profile fabric-upholstered bedside tables in matching neutral tones | |
| User demographic | Designed for adult sleepers seeking modern, soft-upholstered bedroom furniture |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Applicable to domestic bed safety and strength requirements | |
|---|---|---|
| EN 1022:2018 | Applicable to furniture stability testing for seating and beds |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for wooden furniture frames | |
|---|---|---|
| GB 18584-2001 | Applicable to formaldehyde emission limits for interior wood furniture | |
| GB/T 1952.2-2011 | Applicable to upholstered furniture soft covering durability tests |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture frames; 2. GB 18584-2001: Applicable to formaldehyde emission limits for interior wood furniture; 3. GB/T 1952.2-2011: Applicable to upholstered furniture soft covering durability tests; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
