| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (queen size with attached nightstand) | 2240 x 1830 x 1170 mm | |
|---|---|---|
| Headboard height from floor | 1170 mm | |
| Headboard padding thickness | 60 mm | |
| Mattress support surface height | 360 mm | |
| Underbed clearance (frame to floor) | 200 mm | |
| Side rail thickness | 70 mm | |
| Matching nightstand dimensions | 500 x 420 x 550 mm | |
| Recommended mattress thickness | 360 mm | |
| Wood slat width | 70 mm | |
| Slat spacing | 75 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Total static weight capacity (sleep surface) | 363 kg | |
|---|---|---|
| Nightstand static load per drawer | 15 kg | |
| Number of supported sleepers | 2 | |
| Net weight (bed frame only) | 68 kg | |
| Mattress sag prevention rating | 10 years | |
| Floor protection load per leg | 60 kg | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg | |
| Recommended Procurement Warranty | Frame 10 years; hardware 5 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Cream matte faux leather (PU leather) | |
|---|---|---|
| Headboard padding | 35kg/m³ high-density polyurethane foam | |
| Internal bed frame | 18mm thick engineered plywood and MDF | |
| Support slats | 12mm thick laminated birch plywood slats | |
| Legs | 1.2mm thick black powder-coated carbon steel | |
| Nightstand exterior | Cream faux leather matching bed upholstery | |
| Nightstand drawer hardware | Matte black metal pull handles | |
| Leg floor pads | Non-slip rubber foot caps | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
| Mattress support system | Wooden slat platform with 1 center support rail | |
|---|---|---|
| Noise-reduction joint design | Locking hardware with felt slat pads | |
| Nightstand storage | 2 fully extendable soft-close drawers | |
| Underbed access | 200mm open clearance | |
| Headboard wall alignment | Flat rear profile | |
| Assembly hardware integration | Pre-drilled alignment points | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary application space | Master bedrooms in modern minimalist residential interiors | |
|---|---|---|
| Secondary application space | Guest bedrooms in short-term rental properties | |
| Target user group | Adult households seeking low-maintenance contemporary bedroom furniture | |
| Recommended placement | Positioned against a wall with 500mm side clearance for nightstand access | |
| Recommended pairing | 300 mm thick memory foam or hybrid queen mattress | |
| Style coordination | Pairs with light wood, neutral fabric and black metal accent furniture |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Applicable for domestic bed safety requirements, structural strength and stability | |
|---|---|---|
| EN 1334:1996 | Applicable for bed and mattress durability test methods, cyclic load performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements of wooden furniture, covering structural stability | |
|---|---|---|
| GB 18584-2001 | Applicable for limit of harmful substances in wooden furniture, formaldehyde emission control | |
| GB/T 35452-2017 | Applicable for furniture surface performance testing, upholstery abrasion resistance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements of wooden furniture, covering structural stability; 2. GB 18584-2001: Applicable for limit of harmful substances in wooden furniture, formaldehyde emission control; 3. GB/T 35452-2017: Applicable for furniture surface performance testing, upholstery abrasion resistance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
