Light Gray Boucle Upholstered Low-Profile Platform Bed with Left Wrap-Around Wing Headboard and Matching Curved End-of-Bed Bench (model UPB-KG-LGW-BRZ-001) is listed under hospitality hotel bed. Dimensions: 2160 × 2290 × 1140 mm. Materials: 100% polyester textured boucle fabric, light gray tone. Load capacity: 35 kg. Product Features: modern,minimalist,low-profile,upholstered,platform,slat,support,no,box,spring,required,matching,bench,included. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | AIMENGSHI | Model | UPB-KG-LGW-BRZ-001 |
| Overall dimensions (W × D × H) | 2160 × 2290 × 1140 mm | overall bed dimensions (king size) | 2290 x 2160 x 1140 mm |
| mattress support platform dimensions | 2030 x 1930 mm | headboard total height | 1140 mm |
| headboard wrap wing depth (left side) | 350 mm | bed base side rail height (from floor to top of platform) | 350 mm |
| under-bed floor clearance | 150 mm | support leg height | 150 mm |
| matching end-of-bed bench dimensions | 1830 x 410 x 470 mm | bench seat height from floor | 470 mm |
| headboard upholstery padding thickness | 80 mm | bed side rail upholstery thickness | 50 mm |
| slat width (support system) | 70 mm | slat spacing (center to center) | 80 mm |
| Side Rail Thickness | 40 mm | Slat Spacing | 80 mm |
| Center Support Leg Count | Recommended 6legs | total static weight capacity (bed) | 500 kg |
| mattress compatibility maximum thickness | 305 mm | mattress compatibility minimum thickness | 152 mm |
| bench static weight capacity | 180 kg | bed net weight (without mattress/bedding) | 62 kg |
| slat system static load per slat | 35 kg | hardware service life | 10 years |
| noise emission during use | ≤20 dB | fabric abrasion resistance (Martindale) | 30000 cycles |
| Bed Static Load Reference | 400 kg | external upholstery fabric | 100% polyester textured boucle fabric, light gray tone |
| headboard padding | 35 kg/m³ high-density polyurethane foam | bed side rail/bench padding | 28 kg/m³ polyurethane foam |
| internal bed frame structure | 18 mm thick plywood + 1.2 mm thick reinforced steel cross beams | support slats | 13 mm thick reinforced plywood slats |
| support legs (bed and bench) | 3 mm thick dark bronze finished carbon steel, block profile | hardware connectors | Zinc-plated steel bolts, brackets and barrel nuts |
| seam construction | Stitched seam segmentation with 8 mm stitch pitch | fabric backing | Non-woven polypropylene dust cover under bed base |
| Slat Thickness | 15 mm bent plywood or solid timber | Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner |
| Reference Finish / Color Count | Recommended 6timber/upholstery options | slat support system | Fixed wood slat platform, eliminates need for separate box spring |
| under-bed space | 150 mm open clearance for robot vacuum access and small item storage | matching bench function | Curved sculpted upholstered seat for end-of-bed seating and dressing |
| headboard function | Padded left wrap-around wing provides soft back support for seated in-bed use | noise reduction design | Tight cross-beam connections and slat buffers eliminate frame squeak during use |
| floor protection | Plastic glide pads on metal leg bases prevent hard floor scratching | bed orientation | Wall-mounted placement required for left wing headboard alignment |
| upholstery maintenance | Spot clean only with dry or damp microfiber cloth to preserve boucle texture | Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | Reference Packaged Gross Weight | 130 kg/set |
| Reference Packaging Volume | 0.9 m³/set | residential primary bedroom | Suitable for king-size bedroom layouts as a statement low-profile sleeping set |
| modern minimalist/contemporary interiors | Matches neutral textured upholstery and bronze metal finish design palettes | corner or left-wall placement | Left-side wrap headboard designed for flush alignment against adjacent wall |
| residential guest bedroom suites | Neutral light gray finish coordinates with varied guest room decor schemes | boutique hotel guest rooms | Commercial-grade durability rating suitable for high-end hospitality installations |
| dressing/bedside seating | Matching bench provides additional seating for dressing and putting on footwear | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2160 × 2290 × 1140 mm | |
|---|---|---|
| overall bed dimensions (king size) | 2290 x 2160 x 1140 mm | |
| mattress support platform dimensions | 2030 x 1930 mm | |
| headboard total height | 1140 mm | |
| headboard wrap wing depth (left side) | 350 mm | |
| bed base side rail height (from floor to top of platform) | 350 mm | |
| under-bed floor clearance | 150 mm | |
| support leg height | 150 mm | |
| matching end-of-bed bench dimensions | 1830 x 410 x 470 mm | |
| bench seat height from floor | 470 mm | |
| headboard upholstery padding thickness | 80 mm | |
| bed side rail upholstery thickness | 50 mm | |
| slat width (support system) | 70 mm | |
| slat spacing (center to center) | 80 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| total static weight capacity (bed) | 500 kg | |
|---|---|---|
| mattress compatibility maximum thickness | 305 mm | |
| mattress compatibility minimum thickness | 152 mm | |
| bench static weight capacity | 180 kg | |
| bed net weight (without mattress/bedding) | 62 kg | |
| slat system static load per slat | 35 kg | |
| hardware service life | 10 years | |
| noise emission during use | ≤20 dB | |
| fabric abrasion resistance (Martindale) | 30000 cycles | |
| Bed Static Load Reference | 400 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| external upholstery fabric | 100% polyester textured boucle fabric, light gray tone | |
|---|---|---|
| headboard padding | 35 kg/m³ high-density polyurethane foam | |
| bed side rail/bench padding | 28 kg/m³ polyurethane foam | |
| internal bed frame structure | 18 mm thick plywood + 1.2 mm thick reinforced steel cross beams | |
| support slats | 13 mm thick reinforced plywood slats | |
| support legs (bed and bench) | 3 mm thick dark bronze finished carbon steel, block profile | |
| hardware connectors | Zinc-plated steel bolts, brackets and barrel nuts | |
| seam construction | Stitched seam segmentation with 8 mm stitch pitch | |
| fabric backing | Non-woven polypropylene dust cover under bed base | |
| Slat Thickness | 15 mm bent plywood or solid timber | |
| Primary Connector Specification | Reference M8-M10 bolts with at least 2 fixing points per corner | |
| Reference Finish / Color Count | Recommended 6timber/upholstery options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| slat support system | Fixed wood slat platform, eliminates need for separate box spring | |
|---|---|---|
| under-bed space | 150 mm open clearance for robot vacuum access and small item storage | |
| matching bench function | Curved sculpted upholstered seat for end-of-bed seating and dressing | |
| headboard function | Padded left wrap-around wing provides soft back support for seated in-bed use | |
| noise reduction design | Tight cross-beam connections and slat buffers eliminate frame squeak during use | |
| floor protection | Plastic glide pads on metal leg bases prevent hard floor scratching | |
| bed orientation | Wall-mounted placement required for left wing headboard alignment | |
| upholstery maintenance | Spot clean only with dry or damp microfiber cloth to preserve boucle texture | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| residential primary bedroom | Suitable for king-size bedroom layouts as a statement low-profile sleeping set | |
|---|---|---|
| modern minimalist/contemporary interiors | Matches neutral textured upholstery and bronze metal finish design palettes | |
| corner or left-wall placement | Left-side wrap headboard designed for flush alignment against adjacent wall | |
| residential guest bedroom suites | Neutral light gray finish coordinates with varied guest room decor schemes | |
| boutique hotel guest rooms | Commercial-grade durability rating suitable for high-end hospitality installations | |
| dressing/bedside seating | Matching bench provides additional seating for dressing and putting on footwear |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture - Beds and mattresses - Safety requirements and test methods | |
|---|---|---|
| EN 1022:2018 | Domestic furniture - Seating - Determination of stability, applicable to matching end bench |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to plywood frame and slat components | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture | |
| GB/T 1952.2-2011 | Spring soft mattresses, applicable to mattress compatibility interface dimensions |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to plywood frame and slat components; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture; 3. GB/T 1952.2-2011: Spring soft mattresses, applicable to mattress compatibility interface dimensions; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp