Name: Olive Textured Fabric Rounded Edge Low-Profile Upholstered Platform Bed
Brand: AIMENGSHI
SKU: UMG34U

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1880 × 2240 × 1050 mm
Internal mattress fit size	1800 x 2000 mm
Headboard height from floor	1050 mm
Headboard padding thickness	80 mm
Side rail height from floor	350 mm
Footboard height from floor	350 mm
Floor clearance under frame	50 mm
Recommended mattress thickness	305 mm
Side rail thickness	120 mm
Footboard radius (rounded end)	180 mm
Headboard corner radius	60 mm
Center support beam height	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total static weight capacity	318 kg
Net product weight	76 kg
Slat static point load capacity	120 kg
Recommended number of users	2 adults
Upholstery abrasion resistance (Martindale)	30000 cycles
Padding compression recovery rate	92%
Slat spacing for mattress support	75 mm
Warranty period (frame)	3 years
Fabric warranty coverage	0 years
Bed Static Load Reference	400 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

External upholstery fabric	Textured woven olive-brown polyester fabric, 350gsm
Internal load-bearing frame	18mm thick plywood and solid pine wood, steel brace reinforcements
Headboard and frame padding	25kg/m3 density polyester fiber fill, wrapped over frame edges
Support slat system	12mm thick curved solid birch slats, 14 slats per bed
Center support structure	40mm x 60mm solid wood beam with 2 central support legs
Floor support feet	20mm diameter plastic floor glides, 50mm height, non-marking
Edge trim binding	Matching fabric stitched edge binding, 8mm seam pitch
Hardware connectors	Zinc-plated steel bolts, dowels and barrel nuts for knock-down assembly
Slat anti-noise padding	EVA foam strips between slats and support rails
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Mattress support system	Wood slat platform design, no box spring required for direct mattress placement
Collision protection	Fully rounded padded edges on headboard corners, side rails and footboard
Floor protection	Non-marking plastic glides on all support feet to prevent hard floor scratching
Assembly structure	Knock-down flat-pack design with included hex key and illustrated instructions
Underbed airflow	Evenly spaced wood slats with 50mm floor clearance to promote mattress ventilation
Cleaning compatibility	Spot-clean only with mild fabric detergent, no machine washing of upholstery
Position stability	Fixed non-rocking frame structure with tightened bolted connections and central supports
Noise reduction	EVA buffer pads between slats and rails to eliminate squeaking during use
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary residential use	Master bedrooms and guest bedrooms for modern, wabi-sabi or mid-century modern interiors
Space suitability	Small to medium sized bedrooms, low-profile design reduces visual bulk in compact rooms
User compatibility	Adult users including couples, suitable for users who prefer low bed access height
Recommended pairing	Pair with 300 mm thick memory foam, hybrid or spring mattresses for optimal comfort
Flooring compatibility	Suitable for hardwood, laminate, tile and carpeted floors with non-marking glides
Style coordination	Coordinates with warm neutral, earth tone and muted fabric bedroom furniture sets

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1725:1998	Domestic furniture - beds and mattresses, safety and strength performance requirements
EN 1021-1:2014	Upholstered furniture - ignitability resistance to smouldering cigarette sources

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to wood frame structural integrity
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances of wood furniture
GB/T 19822-2005	Test methods for furniture structural strength, applicable to static load and stability testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood frame structural integrity;
2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood furniture;
3. GB/T 19822-2005: Test methods for furniture structural strength, applicable to static load and stability testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · UPB-RND-OLV-1800

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · UPB-RND-OLV-1800

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · UPB-RND-OLV-1800Open Export Tool

Quick Actions

Post an RFQ

Product Description

The AIMENGSHI UPB-RND-OLV-1800 Olive Textured Fabric Rounded Edge Low-Profile Upholstered Platform Bed delivers understated, approachable style for residential bedroom settings. Its low-slung silhouette features fully rounded, padded edges across the headboard corners, side rails, and footboard, wrapped in textured woven olive-brown polyester fabric with matching stitched binding for a cohesive, soft visual presence that minimizes bulky visual weight. The headboard sits 1050mm from the floor with 80mm of plush padding, while the side rails and footboard align at a 350mm height for easy access, and a 50mm under-frame clearance keeps the profile grounded without closing off airflow beneath the unit.
Construction centers on a robust internal frame built from 18mm thick plywood and solid pine, reinforced with steel braces for long-term stability. The mattress support system uses 14 curved 12mm solid birch slats spaced 75mm apart, mounted over a 40mm x 60mm solid wood center beam with two central support legs to eliminate sag. EVA foam strips between slats and support rails reduce operational noise, while zinc-plated steel bolts, dowels, and barrel nuts secure the knock-down assembly, with non-marking 20mm diameter plastic glides on all feet to protect flooring surfaces. Upholstery fabric is 350gsm textured polyester rated for 30000 Martindale abrasion cycles, with 25kg/m3 density polyester fiber fill padding that offers 92% compression recovery for lasting softness.
Functionally, the wood slat platform supports direct mattress placement without a box spring, accommodating an 1800 x 2000mm mattress with a recommended 305mm thickness for optimal comfort. The total static weight capacity reaches 318kg, suitable for two adult users, with evenly spaced slats and underbed clearance promoting consistent mattress ventilation. The frame arrives in flat-pack packaging with a included hex key and illustrated instructions, requiring 40 minutes of assembly time per set; upholstery is spot-clean only with mild fabric detergent, as machine washing is not compatible.
This bed is well suited for small to medium sized master or guest bedrooms, complementing modern, wabi-sabi, and mid-century modern interiors decorated with warm neutral, earth tone, and muted fabric furnishings. It performs reliably across hardwood, laminate, tile, and carpeted flooring. When procuring, note the unit ships across 2 cartons per set, with a total packaged gross weight of 130kg, and verify space clearance to fit the 1880 x 2240 x 1050mm overall footprint, as well as mattress dimensions to match the specified internal fit size for secure placement.

Olive Textured Fabric Rounded Edge Low-Profile Upholstered Platform Bed Specifications

Suppliers and stock