Product supplierUpholstered Low-Profile Platform Bed with Padded Panel Headboard, Light gray fabric or leather-look soft cover over segmented padding
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1900 x 2200 x 1050 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 68 kg | |
|---|---|---|
| Static bed-frame load capacity | 350 kg | |
| Mattress weight capacity | 55 kg | |
| Occupant dynamic load allowance | 2 x 120 kg | |
| Under-bed accessible storage height | 120 mm | |
| Leg floor contact load | 88 kg per leg at maximum static load | |
| Recommended mattress thickness | 250 mm | |
| Assembly duration | 45 minutes | |
| Service life target | 8 years | |
| Occupant capacity | 2 adults |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Headboard upholstery | Light gray fabric or leather-look soft cover over segmented padding | |
|---|---|---|
| Headboard padding | High-resilience polyurethane foam with soft fiber topper, 80 mm total thickness | |
| Side and foot rails | Light gray upholstered panels over board or composite rail substrate | |
| Internal support frame | Solid wood or engineered-wood bed rail frame, 28 mm nominal member thickness | |
| Slat support system | 14 curved birch or eucalyptus plywood slats, 55 mm wide and 9 mm thick | |
| Support legs | Four black powder-coated steel legs, 32 mm diameter or equivalent section |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Platform support | Mattress rests directly on the slatted platform without a box spring, providing a 320 mm support height | |
|---|---|---|
| Headboard support | Continuous six-panel padded headboard provides backrest cushioning and prevents pillows from sliding off | |
| Bed access | Low 120 mm under-bed clearance permits cleaning and flat storage access while maintaining a compact modern profile | |
| Assembly method | Knock-down headboard, side rails, foot rail, slat roll and screw-on legs connect with cam bolts, brackets and barrel nuts |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary residential setting | Modern main bedroom or guest suite where the soft gray headboard and 1800 mm mattress width accommodate two adults | |
|---|---|---|
| Recommended room layout | Place against a feature wall with 500 mm side clearance for nightstands, linen changes and cleaning access around the 2200 mm length |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture safety, strength and durability requirements for beds; recommended for frame, edge and load validation | |
|---|---|---|
| EN 12521:2015 | Safety, strength and durability requirements for domestic tables; excluded from this bed specification | |
| EN 71-3:2019+A1:2021 | Migration of certain elements in accessible materials; useful if the bed is marketed for family or youth bedrooms |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2024 | General technical requirements for wooden furniture; use for dimensional accuracy, stability and workmanship acceptance | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements; use for coated steel leg strength, finish and corrosion checks | |
| GB 18584-2001 | Indoor decorative-material limit of formaldehyde release for wood-based furniture components | |
| GB/T 10357.6-2013 | Furniture mechanical test for bed strength and durability; use for static load, impact and long-term bed testing |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2024: General technical requirements for wooden furniture; use for dimensional accuracy, stability and workmanship acceptance; 2. GB/T 3325-2017: Metal furniture general technical requirements; use for coated steel leg strength, finish and corrosion checks; 3. GB 18584-2001: Indoor decorative-material limit of formaldehyde release for wood-based furniture components; 4. GB/T 10357.6-2013: Furniture mechanical test for bed strength and durability; use for static load, impact and long-term bed testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool