Armless Upholstered Solid Wood Dining Chair (model DC-SW-UPH-001) is listed under hotel guest room chair, with overall dimensions of 559 × 610 × 890 mm and main material of Imported Ash Solid Wood. Load capacity: 136 kg. Certifications: armless,design,fixed,four-leg,base,padded,upholstered,seat,and,back. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 559 x 610 x 890 mm | |
|---|---|---|
| Seat width | 559 mm | |
| Seat depth | 510 mm | |
| Seat height from floor | 508 mm | |
| Backrest height above seat | 457 mm | |
| Front leg cross-section | 30 x 30 mm | |
| Rear leg cross-section | 35 x 35 mm | |
| Seat padding thickness | 64 mm | |
| Backrest padding thickness | 38 mm | |
| Leg floor contact pad diameter | 25 mm | |
| Seat front edge radius | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single chair net weight | 12.7 kg | |
|---|---|---|
| Static weight capacity | 181 kg | |
| Seat foam density | 50 kg/m³ | |
| Fabric abrasion resistance | 30000 Martindale cycles | |
| Foam rebound rate | 45% | |
| Seam stitch pitch | 8 stitches per inch | |
| Frame static load test rating | 136 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Frame and legs | Solid rubberwood with stained walnut or light oak finish | |
|---|---|---|
| Seat and back upholstery | Woven polyester fabric, 0.8mm thickness, breathable matte texture | |
| Seat padding | High-density polyurethane foam with 10mm top dacron layer | |
| Back padding | Medium-density polyurethane foam | |
| Internal support structure | 18mm thick plywood seat base, connected to wood frame with metal dowels | |
| Floor protection glides | Injection-molded plastic pads fitted to each leg foot |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating type | Fixed static armless seating with no swivel, tilt, or height adjustment | |
|---|---|---|
| Stacking capability | Non-stackable design, four fixed legs positioned to prevent nesting | |
| Assembly requirement | Legs-only assembly with included hardware, 4 screws per leg | |
| Floor compatibility | Non-marking plastic glides suitable for hardwood, tile, and vinyl flooring |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining rooms | Pairs with standard 760 mm height dining tables for everyday family meals | |
|---|---|---|
| Cafes and casual restaurants | Light commercial use with stain-resistant fabric for high-turnover seating |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety for domestic seating, applicable for performance testing | |
|---|---|---|
| EN 1022:2018 | Seating stability test standard, applicable for front/rear/side tipping verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame strength and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for formaldehyde emission verification | |
| GB/T 19833-2023 | Furniture mechanical strength test for seating, applicable for static load and stability validation |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame strength and finish quality; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for formaldehyde emission verification; 3. GB/T 19833-2023: Furniture mechanical strength test for seating, applicable for static load and stability validation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp