Interlocking Cylindrical Fabric Modular Lounge Seating Set (model MLS-CYL8-2MOD) is listed under hotel guest room chair, with overall dimensions of 860 × 1520 × 430 mm and main material of Imported Ash Solid Wood. Load capacity: 160 kg. Certifications: Soft,upholstered,construction,modular,interlocking,design,low-profile,lounge,form. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall two-module set dimensions | 1520 x 860 x 430 mm | |
|---|---|---|
| Single cylindrical unit diameter | 620 mm | |
| Overall unit height from floor to top of backrest | 430 mm | |
| Seat pan diameter per module | 420 mm | |
| Integrated partial backrest height | 140 mm | |
| Recessed seat pan depth below top edge | 100 mm | |
| Backrest arc wrap angle around seat | 210 degrees | |
| Upholstery thickness at unit top edge | 80 mm | |
| Floor contact base diameter per unit | 610 mm | |
| Seat surface height from floor | 330 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-seat static load capacity | 160 kg | |
|---|---|---|
| Net weight per two-module set | 41 kg | |
| Recommended maximum occupancy per set | 2 users | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Seam tensile strength | 180 N | |
| Warranty period for structural frame | 5 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Woven polyester fabric with matte textured finish | |
|---|---|---|
| Seat and back padding | High-resilience polyurethane foam core | |
| Internal support frame | 18 mm thick engineered plywood skeleton | |
| Underside base layer | Non-slip non-woven fabric floor protector | |
| Modular connection hardware | Hidden plastic alignment clips | |
| Edge construction | Fully upholstered rounded edges with tight topstitching |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular interlocking | Adjacent units connect via hidden alignment clips to form custom layouts | |
|---|---|---|
| Fixed seating posture | Low-relaxation perch position with partial lateral back support | |
| Tool-free reconfiguration | Units disconnect and rearrange without specialized tools | |
| Floor-placed installation | Freestanding units require no permanent floor or wall fixing |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception and waiting areas | Low-profile soft seating provides casual, welcoming guest seating | |
|---|---|---|
| Collaborative breakout and lounge zones | Modular layout supports flexible small-group interaction spaces |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture seating, stability test method for freestanding units | |
|---|---|---|
| EN 16139:2013 | Non-domestic seating strength and durability for public lounge areas |
US and Canada office-furniture standards
| ANSI/BIFMA X5.41-2020 | Lounge seating standard for public and commercial space durability |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to inner frame structural performance | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances for wooden furniture, applicable to formaldehyde emission checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to inner frame structural performance; 2. GB 18584-2001: Limit of harmful substances for wooden furniture, applicable to formaldehyde emission checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp