Two-Tone Boucle Upholstered Armless 360° Swivel Lounge Chair (model SWL-BUC-2T-790) is listed under hotel guest room chair, with overall dimensions of 790 × 830 × 830 mm and main material of textile crafts. Load capacity: 150 kg. Certifications: Armless,design,360-degree,swivel,two-tone,upholstery,fully,enclosed,upholstered,base,bucket,seat,form. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 790 x 830 x 830 mm | |
|---|---|---|
| Seat height | 445 mm | |
| Seat width | 760 mm | |
| Seat depth | 690 mm | |
| Backrest height above seat | 385 mm | |
| Seat cushion thickness | 150 mm | |
| Backrest padding thickness | 120 mm | |
| Base diameter | 740 mm | |
| Floor glide diameter | 25 mm | |
| Seat pitch angle | 10° | |
| Side wall thickness at seat edge | 80 mm | |
| Clearance under base glides | 5 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended static load capacity | 150 kg | |
|---|---|---|
| Net product weight | 34 kg | |
| Swivel rotation range | 360 degrees | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 55% | |
| Upholstery abrasion resistance | 35000 Martindale cycles | |
| Floor glide static load rating per unit | 40 kg | |
| Frame joint static load rating | 300 kg | |
| Swivel mechanism cycle rating | 20000 rotations | |
| Warranty period | 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and inner back upholstery | Grey textured boucle 100% polyester fabric, 1.2mm thickness | |
|---|---|---|
| Outer shell and base upholstery | Chartreuse textured boucle 100% polyester fabric, 1.2mm thickness | |
| Inner load-bearing frame | 18mm thick plywood and engineered hardwood, corner-blocked joinery | |
| Seat and back fill | High-density polyurethane foam wrapped with 20mm polyester fiber batting | |
| Swivel mechanism | 2.5mm thick powder-coated steel rotating plate with nylon bushing | |
| Floor glides | Black non-marking nylon glides with felt bottom pads |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| 360-degree rotation | Smooth silent swivel without height adjustment, tilt, or recline | |
|---|---|---|
| Floor protection | Non-marking felt-padded glides prevent scuffing on hard wood or tile floors | |
| Cleaning compatibility | Solvent-based spot cleaning suitable for boucle polyester upholstery | |
| Assembly requirement | Fully assembled delivery with no user hardware installation needed |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living spaces | Suitable for living rooms, reading nooks, and bedroom accent seating for single users | |
|---|---|---|
| Commercial lounge areas | Appropriate for office reception zones, hotel lobbies, and casual breakout spaces |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Applicable for non-domestic seating strength, durability and stability requirements | |
|---|---|---|
| EN 1021-1:2014 | Applicable for upholstered furniture cigarette ignition resistance testing |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Applicable for lounge seating static and dynamic load performance evaluation | |
|---|---|---|
| ANSI/BIFMA X7.1-2011 | Applicable for furniture formaldehyde emission standard for low-emitting products |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general wooden furniture mechanical and dimensional stability requirements | |
|---|---|---|
| GB 18580-2017 | Applicable for formaldehyde emission limits on engineered wood frame components | |
| GB/T 19833-2023 | Applicable for furniture structural strength and durability testing for seating |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general wooden furniture mechanical and dimensional stability requirements; 2. GB 18580-2017: Applicable for formaldehyde emission limits on engineered wood frame components; 3. GB/T 19833-2023: Applicable for furniture structural strength and durability testing for seating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp