Two-Tone Channel-Quilted Armless Upholstered Dining Chair with Gold Metal Legs (model DC-TTQ-01) is listed under hotel guest room chair, with overall dimensions of 549 × 670 × 1010 mm and main material of Imported Ash Solid Wood. Load capacity: 150 kg. Certifications: Contemporary,glam,style,Armless,fixed,seating,Two-tone,upholstery,Quilted,stitch,detailing. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 549 x 670 x 1010 mm | |
|---|---|---|
| Seat height | 495 mm | |
| Seat width | 515 mm | |
| Seat depth | 480 mm | |
| Backrest height | 515 mm | |
| Backrest angle | 102 degrees | |
| Floor clearance under seat | 205 mm | |
| Front leg diameter | 32 mm | |
| Rear leg width | 45 mm | |
| Seat cushion thickness | 110 mm | |
| Front leg spacing (side to side) | 445 mm | |
| Rear leg splay angle | 12 degrees | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended static load capacity | 150 kg | |
|---|---|---|
| Net weight per chair | 18 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 45% | |
| Upholstery abrasion resistance | 30000 Martindale cycles | |
| Seam tensile strength | 120 N | |
| Leg finish corrosion resistance | 48 hours salt spray resistance | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and inner back upholstery | Beige performance polyester fabric, 0.8 mm thickness, stain-resistant finish | |
|---|---|---|
| Outer back and side shell upholstery | Navy blue performance polyester fabric, 0.8 mm thickness, matching stain-resistant finish | |
| Seat cushion padding | High-density polyurethane foam, 110 mm thick, layered with 10 mm soft top layer | |
| Inner structural frame | 15 mm thick plywood with corner-block reinforced joinery | |
| Front support legs | 1.2 mm thick steel tube with brushed gold electroplated finish, non-marking plastic foot glides | |
| Rear support legs | 1.2 mm thick steel tube upholstered in navy matching fabric, angled outward, fitted with protective glides |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Fixed non-swivel, non-reclining upright seating designed for dining table use | |
|---|---|---|
| Stability feature | Outward-splayed rear legs widen base footprint to reduce forward/side tip risk | |
| Floor protection | Non-marking plastic glides on all leg bases prevent hard floor scratching | |
| Stitch detailing | Vertical channel stitching transitions to hexagonal quilt pattern on lower back for decorative structure |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining rooms | Pairs with standard 750 mm high dining tables for daily household meal seating | |
|---|---|---|
| Restaurant and cafe seating | Durable upholstery and stable base suit high-traffic commercial food service spaces |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable to domestic furniture seating strength, durability and stability requirements | |
|---|---|---|
| EN 1022:2018 | Applicable to seating stability test methods for non-domestic and domestic chairs |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | Applicable to general-purpose office/contract seating strength and stability, optional for commercial dining | |
|---|---|---|
| ANSI/BIFMA X5.4-2020 | Applicable to lounge and public seating durability, suitable for high-traffic dining areas |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for wooden furniture, for frame strength verification | |
|---|---|---|
| GB 18584-2001 | Applicable to limit of harmful substances in wooden furniture, for indoor air quality compliance | |
| GB/T 2912.1-2009 | Applicable to textile formaldehyde content testing, for upholstery fabric safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture, for frame strength verification; 2. GB 18584-2001: Applicable to limit of harmful substances in wooden furniture, for indoor air quality compliance; 3. GB/T 2912.1-2009: Applicable to textile formaldehyde content testing, for upholstery fabric safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp