Armless Upholstered Solid Wood Frame Dining Side Chair (model DIN-ARL-TAN-WD-001) is listed under hotel guest room chair, with overall dimensions of 580 × 630 × 820 mm and main material of Imported Ash Solid Wood. Load capacity: 70 kg. Certifications: modern,minimalist,armless,solid,wood,frame,upholstered,seat,and,back,tapered,legs. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall assembled dimensions | 580 x 630 x 820 mm | |
|---|---|---|
| Seat width | 540 mm | |
| Seat depth | 500 mm | |
| Seat height from floor | 500 mm | |
| Backrest height above seat | 370 mm | |
| Seat cushion thickness | 160 mm | |
| Leg cross-section at floor | 30 mm | |
| Front leg splay angle | 8 degrees | |
| Rear leg splay angle | 5 degrees | |
| Seat rail height above floor | 390 mm | |
| Under-seat knee clearance height | 380 mm | |
| Backrest width at top | 480 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight per chair | 12 kg | |
|---|---|---|
| Recommended static weight capacity | 181 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 45% | |
| Leg floor contact static load per leg | 70 kg | |
| Stacking quantity | 0 | |
| Warranty period | 1 year | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Frame and legs | Solid hardwood with natural light oak finish, 25mm thick seat rail | |
|---|---|---|
| Seat and back upholstery | 1.2mm thick camel-tan faux leather, wipe-clean surface | |
| Seat support structure | 8mm thick plywood seat base with elastic webbing under foam | |
| Seat and back fill | High-resilience polyurethane foam, tight-upholstered to frame | |
| Leg floor protection | Felt floor protection pads affixed to each leg base | |
| Joinery hardware | Zinc-plated steel corner brackets and wood screws at seat rail joints |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Stationary upright seating for dining use, no recline, swivel, or height adjustment | |
|---|---|---|
| Table compatibility | Armless slim profile tucks fully under standard 750mm high dining tables | |
| Floor protection | Felt leg pads prevent scratching hard flooring surfaces without additional accessories | |
| Upholstery maintenance | Smooth non-porous upholstery wipes clean with damp cloth for spill resistance |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining rooms | Suitable for daily use at standard-height dining tables, armless design maximizes seating count | |
|---|---|---|
| Cafes and casual restaurants | Durable solid wood frame and wipe-clean upholstery suit light commercial high-traffic seating |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable for domestic dining chair strength, durability and safety requirements for seating | |
|---|---|---|
| EN 1022:2018 | Applicable for seating stability testing for non-upholstered and upholstered domestic chairs |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements of wooden furniture, dimensional stability and joinery strength | |
|---|---|---|
| GB/T 16799-2008 | Applicable for faux leather upholstery material performance, abrasion and colorfastness requirements | |
| GB 18584-2001 | Applicable for limit of harmful substances in wooden furniture, formaldehyde emission control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements of wooden furniture, dimensional stability and joinery strength; 2. GB/T 16799-2008: Applicable for faux leather upholstery material performance, abrasion and colorfastness requirements; 3. GB 18584-2001: Applicable for limit of harmful substances in wooden furniture, formaldehyde emission control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp