Glossy White Egg-Shaped Lounge Chair with Red Cushion (model EGG-LOUNGE-WR-920) is listed under hotel guest room chair. Dimensions: 920 × 880 × 1180 mm. Materials: Glossy white molded fiberglass-reinforced composite or ABS polymer, formed as one continuous egg-shaped enclosure. Load capacity: 220 kg. Product Features: modern,lounge,chair,enclosed,egg,shell,high-back,design,glossy,white,red,fabric,cushion,swivel,base,implied. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | YOUZHUO | Model | EGG-LOUNGE-WR-920 |
| Finished Seat Cushion Thickness | 90 mm | Backrest Padding Thickness | 70 mm |
| Lumbar Support Zone Height | 240 mm | Clear Width Between Armrests | 540 mm |
| Product net weight | 32 kg | Rated user weight | 140 kg |
| Seating capacity | 1 adult | Shell static load target | 220 kg |
| Cushion foam density | 35 kg/m3 | Cushion compression set target | 8 percent after 22 hours at 70 degrees C |
| Fabric abrasion target | 50,000 Martindale cycles | Swivel mechanism cycle target | 100,000 rotations |
| Warranty target | 36 months | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Outer shell | Glossy white molded fiberglass-reinforced composite or ABS polymer, formed as one continuous egg-shaped enclosure | Inner cushions | Red woven fabric over 90 mm polyurethane foam pads following the seat and back curves |
| Internal support | Welded steel tube or plywood carrier anchored inside the shell with M8 fixing points | Base assembly | Concealed circular steel swivel plate or fixed reinforced bottom ring with a protective floor glide |
| Shell finish | High-gloss white painted or gel-coated surface with polished rounded edges | Upholstery construction | Tailored red fabric panels with sewn perimeter seams attached over removable or fixed foam inserts |
| Enclosed lounge posture | Fixed high-back bucket seat supports an upright-relaxed posture at 105 degrees with side walls wrapping the shoulders and hips. | Integrated arm support | The raised molded shell edges serve as 540 mm-high armrests without separate pads or arm adjustments. |
| Rotational use | 360-degree swivel seating should be specified when fitted with the concealed circular bearing; verify the exact base before order. | Cushion service access | Red seat and back inserts should be removable with hook-and-loop or clip fixation to permit fabric replacement and shell cleaning. |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Carton Dimensions | 850× 420× 720 mm | Reference Packaged Gross Weight | 23 kg/set |
| Reference Carton Volume | 0.26 m³/set | Indicative 20GP Loading | 135 sets at 85% space utilization |
| Commercial lounge setting | Suitable for hotel lobbies, executive breakout zones, galleries, and beauty salons where a sculptural single-seat accent chair is needed. | Private relaxation setting | Suited to a reading corner or modern living room because the high enclosed shell provides shoulder privacy and relaxed lounge support. |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 32 kg | |
|---|---|---|
| Rated user weight | 140 kg | |
| Seating capacity | 1 adult | |
| Shell static load target | 220 kg | |
| Cushion foam density | 35 kg/m3 | |
| Cushion compression set target | 8 percent after 22 hours at 70 degrees C | |
| Fabric abrasion target | 50,000 Martindale cycles | |
| Swivel mechanism cycle target | 100,000 rotations | |
| Warranty target | 36 months | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer shell | Glossy white molded fiberglass-reinforced composite or ABS polymer, formed as one continuous egg-shaped enclosure | |
|---|---|---|
| Inner cushions | Red woven fabric over 90 mm polyurethane foam pads following the seat and back curves | |
| Internal support | Welded steel tube or plywood carrier anchored inside the shell with M8 fixing points | |
| Base assembly | Concealed circular steel swivel plate or fixed reinforced bottom ring with a protective floor glide | |
| Shell finish | High-gloss white painted or gel-coated surface with polished rounded edges | |
| Upholstery construction | Tailored red fabric panels with sewn perimeter seams attached over removable or fixed foam inserts |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Enclosed lounge posture | Fixed high-back bucket seat supports an upright-relaxed posture at 105 degrees with side walls wrapping the shoulders and hips. | |
|---|---|---|
| Integrated arm support | The raised molded shell edges serve as 540 mm-high armrests without separate pads or arm adjustments. | |
| Rotational use | 360-degree swivel seating should be specified when fitted with the concealed circular bearing; verify the exact base before order. | |
| Cushion service access | Red seat and back inserts should be removable with hook-and-loop or clip fixation to permit fabric replacement and shell cleaning. |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Commercial lounge setting | Suitable for hotel lobbies, executive breakout zones, galleries, and beauty salons where a sculptural single-seat accent chair is needed. | |
|---|---|---|
| Private relaxation setting | Suited to a reading corner or modern living room because the high enclosed shell provides shoulder privacy and relaxed lounge support. |
EU Market Access Requirements* EN Standards
| EN 16139 seating strength and durability | Applicable non-domestic lounge seating standard for strength, durability, and safety acceptance testing. | |
|---|---|---|
| EN 1022 seating stability | Applicable to verification that the rounded high-back chair does not tip forward, rearward, or sideways. | |
| EN 14465 upholstery fabric abrasion | Applicable textile test basis for Martindale abrasion, pilling, and seam slippage procurement checks. | |
| EN 12521 furniture safety | Applicable general furniture safety reference for edges, stability, and shear hazards in non-domestic interiors. |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| GB/T 10357.2 furniture mechanical test | Applies to seating backrest strength and fatigue test planning for domestic and commercial furniture acceptance. | |
|---|---|---|
| GB/T 10357.3 furniture mechanical test | Applies to seat front-edge static load and fatigue evaluation of the molded lounge chair. | |
| GB 28007 furniture safety | Applies to children's furniture only if a child-use version is marketed; standard adult lounge use should not claim it. |
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture mechanical test: Applies to seating backrest strength and fatigue test planning for domestic and commercial furniture acceptance.; 2. GB/T 10357.3 furniture mechanical test: Applies to seat front-edge static load and fatigue evaluation of the molded lounge chair.; 3. GB 28007 furniture safety: Applies to children's furniture only if a child-use version is marketed; standard adult lounge use should not claim it.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp