Walnut Finish Solid Wood Frame Fabric Upholstered 2-Person Lounge Seating Set with Round Side Table (model LNG-SET-WL02-3PC) is listed under hotel guest room chair, with overall dimensions of 540 × 535 × 790 mm and main material of Imported Ash Solid Wood. Load capacity: 20 kg. Certifications: Walnut,wood,finish,Woven,fabric,upholstery,Sled-base,armchair,set,Fixed,non-reclining,structure. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Set overall footprint (2 chairs + 1 table arranged) | 1400 x 1200 mm | |
|---|---|---|
| Single lounge armchair overall dimensions | 540 x 535 x 790 mm | |
| Lounge chair seat height | 460 mm | |
| Lounge chair seat width | 480 mm | |
| Lounge chair seat depth | 500 mm | |
| Lounge chair backrest height | 420 mm | |
| Lounge chair armrest height | 660 mm | |
| Round side table overall dimensions | 600 x 600 x 500 mm | |
| Side table leg spread diameter | 520 mm | |
| Under-table floor clearance | 450 mm | |
| Wood frame member cross-section | 35 x 35 mm | |
| Seat cushion thickness | 80 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single chair weight capacity | 136 kg | |
|---|---|---|
| Side table top static load capacity | 20 kg | |
| Total set net weight | 45 kg | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Upholstery fabric abrasion resistance | 50000 double rubs | |
| Anti-slip floor pad load distribution | 200 kg per chair | |
| Recommended maximum continuous seating duration per use | 120 minutes | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Chair frame | Solid hardwood with walnut-stained matte lacquer finish | |
|---|---|---|
| Seat and back upholstery | Woven polyester fabric, 0.8 mm thickness | |
| Cushion fill | High-resilience polyurethane foam with non-woven fabric batting | |
| Side table top and legs | Solid hardwood with matching walnut matte lacquer finish | |
| Frame hardware | Zinc-plated steel screw connectors for knockdown assembly | |
| Floor contact points | Non-marking TPE anti-slip glides on all frame feet |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating posture support | Fixed upright 105° back angle for relaxed casual conversation | |
|---|---|---|
| Table function | Fixed round top for holding drinks, reading materials and small personal items | |
| Assembly type | Knockdown flat-pack assembly with hardware included | |
| Floor protection | Integrated glides eliminate need for separate felt pads on hard flooring |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception and waiting areas | Compact two-seat layout for visitor waiting, fits small wall niches and lobby corners | |
|---|---|---|
| Hotel guest room and corridor lounge zones | Walnut wood finish matches mid-century modern and contemporary hotel interior schemes |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture – Strength, durability and safety for seating, applicable to commercial lounge chairs | |
|---|---|---|
| EN 15372:2008 | Furniture – Strength, durability and safety for non-domestic tables, applicable to side table | |
| EN 1022:2018 | Furniture – Seating – Determination of stability, applicable to chair tip resistance |
US and Canada office-furniture standards
| ANSI/BIFMA X5.41-2020 | Lounge and public seating standard, applicable for light commercial reception use | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk products standard, reference for small side table structural performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame components | |
|---|---|---|
| GB/T 19001-2016 | Quality management system guidance for furniture manufacturing and supply | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for indoor air quality compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame components; 2. GB/T 19001-2016: Quality management system guidance for furniture manufacturing and supply; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for indoor air quality compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp