Armless Upholstered Dining Chair with Open Cutout Back (model DC-CUTOUT-WL-01) is listed under hotel guest room chair, with overall dimensions of 540 × 590 × 860 mm and main material of Imported Ash Solid Wood. Load capacity: 40 kg per pad. Certifications: Armless,design,modern,style,fixed,non-swivel,base,dark,navy,upholstery. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 540 x 590 x 860 mm | |
|---|---|---|
| Seat height | 490 mm | |
| Seat width | 480 mm | |
| Seat depth | 480 mm | |
| Seat padding thickness | 80 mm | |
| Backrest total height | 420 mm | |
| Back cutout width | 320 mm | |
| Back cutout height | 150 mm | |
| Leg height | 410 mm | |
| Leg taper diameter (top) | 35 mm | |
| Leg taper diameter (floor) | 20 mm | |
| Leg splay angle | 12 degrees | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight per chair | 6 kg | |
|---|---|---|
| Static weight capacity | 136 kg | |
| Seat foam density | 40 kg/m³ | |
| Foam rebound rate | 45% | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Recommended daily use duration | 4 hours | |
| Floor protection pad load rating | 40 kg per pad | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | 1.2mm thick polyurethane faux leather, dark navy finish, matte grain | |
|---|---|---|
| Seat core fill | High-density polyurethane foam, wrapped with 10mm soft polyester fiber | |
| Internal seat frame | 18mm thick multilayer birch plywood, glued and stapled joints | |
| Leg construction | Solid rubberwood with walnut stain finish, tapered splayed form | |
| Seam construction | 8 stitches per inch (3.15mm seam pitch), matched thread color | |
| Leg tip hardware | 20mm diameter polyethylene anti-slip floor pads, screw-in fitting |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Fixed armless single seat, no swivel, tilt or height adjustment | |
|---|---|---|
| Back support design | Curved enveloping back with semicircular lower cutout for airflow | |
| Stability design | Four outward-splayed legs with wide footprint to prevent tipping | |
| Assembly requirement | Knockdown leg attachment with pre-drilled holes, included hardware |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining rooms | Matches standard dining table height, pairs with 6seat dining sets | |
|---|---|---|
| Office break rooms and pantries | Easy-clean upholstery suitable for casual employee dining use |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Strength, durability and safety requirements for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture flammability, cigarette ignition resistance | |
| EN 16139:2013 | Strength and durability for non-domestic contract seating |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety | |
|---|---|---|
| GB/T 16799-2008 | Performance requirements for polyurethane faux leather upholstery materials | |
| GB 18584-2001 | Limit of harmful substances for wooden furniture, indoor use safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety; 2. GB/T 16799-2008: Performance requirements for polyurethane faux leather upholstery materials; 3. GB 18584-2001: Limit of harmful substances for wooden furniture, indoor use safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp