| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint | 3600 x 1200 x 750 mm | |
|---|---|---|
| Per-user work surface width | 1200 mm | |
| Per-side work surface depth | 600 mm | |
| Central privacy screen height above desk | 300 mm | |
| Mobile 3-drawer pedestal dimensions | 725 x 420 x 480 mm | |
| Minimum seated knee clearance height | 650 mm | |
| Worktop thickness | 25 mm | |
| PVC edge band thickness | 2 mm | |
| Steel support leg tube wall thickness | 1.8 mm | |
| Desktop cable grommet diameter | 80 mm | |
| Drawer internal usable depth | 450 mm | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight (excluding pedestals) | 339 kg | |
|---|---|---|
| Per-workstation static worktop load | 135 kg | |
| Per-drawer static load capacity | 35 kg | |
| Drawer slide cycle rating | 50000 cycles | |
| Adjustable foot vertical adjustment range | 15 mm | |
| Recommended maximum user weight per station | 110 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Work surface | 25mm melamine-faced particleboard | |
|---|---|---|
| Edge trim | 2mm thick PVC edge banding | |
| Support frame | Powder-coated cold-rolled steel Z-cantilever legs | |
| Privacy dividers | Fabric-wrapped fiberboard panels | |
| Mobile pedestal body | 18mm MFC board with matching PVC edges | |
| Pedestal casters | 50mm diameter hard nylon swivel casters | |
| Drawer hardware | Cold-rolled steel 3-section ball bearing slides | |
| Leveling feet | Reinforced nylon with steel threaded stems | |
| Cable management channel | Powder-coated steel under-desk trunking | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 6 individual face-to-face work positions | |
|---|---|---|
| Cable management | Desktop grommets + central under-desk trunking | |
| Privacy screening | Low central dividers between opposing seats | |
| Per-user storage | Included mobile 3-drawer pedestal | |
| Floor leveling | Threaded adjustable feet on all leg bases | |
| Pedestal mobility | 4 swivel casters per storage unit | |
| Modular assembly | Knock-down connected frame design | |
| Drawer operation | Full-extension ball bearing slides | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | |
| Reference Packaging Volume | 1 m³/set |
Recommended spaces / users / usage modes
| Open plan office areas | Suits team-based departments requiring 6 adjacent work positions | |
|---|---|---|
| Startup and co-working spaces | Modular configuration supports flexible team expansion | |
| Back-office administrative departments | Provides dedicated per-user storage and cable management | |
| Call center and operations floors | Low dividers allow supervisor visibility while reducing cross-talk distraction | |
| Recommended configuration | Pair with ergonomic mid-back office chairs and monitor arms |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office work tables safety and strength requirements | |
|---|---|---|
| EN 15372:2016 | Furniture durability strength requirements for non-domestic storage |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products performance standard | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage units performance standard |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB/T 3327-2017 | Technical requirements for metal furniture | |
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB/T 3327-2017: Technical requirements for metal furniture; 3. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
