| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W×D×H) | 2800 × 1200 × 1100 mm | |
|---|---|---|
| Worktop height above floor | 750 mm | |
| Individual work surface width per seat | 700 mm | |
| Worktop depth per side | 600 mm | |
| Desk divider height above worktop | 350 mm | |
| Divider cork panel dimensions (per unit) | 1100 × 300 mm | |
| Knee clearance height under worktop | 650 mm | |
| Knee clearance width at outer angled leg | 600 mm | |
| Storage pedestal depth (per unit) | 600 mm | |
| Storage pedestal width (per unit) | 400 mm | |
| Drawer internal usable height (top shallow drawer) | 100 mm | |
| Drawer internal usable height (bottom deep drawer) | 450 mm | |
| CPU compartment internal dimensions (W×D×H) | 250 × 550 × 500 mm | |
| Angled steel leg splay angle from vertical | 15° | |
| Worktop height above finished floor | 750 mm | |
| Worktop depth per seating side | 600 mm | |
| Worktop panel thickness | 25 mm | |
| Desk divider height above worktop surface | 350 mm |
Net weight / load capacity / users / durability
| Total unit net weight () | 210 kg | |
|---|---|---|
| Worktop static load capacity per seat | 100 kg | |
| Maximum recommended user weight per seat | 120 kg | |
| Divider cork panel pin retention capacity | Holds 20+ pinned notes/photos without tearing | |
| Stability: maximum lateral tilt before tipping | 12° | |
| Durability: drawer slide cycle rating | 50000 open/close cycles | |
| Edge impact resistance | Withstands 10N·m impact without chipping | |
| Seating capacity | 4 people | |
| Maximum user weight per seat (combined user + equipment) | ≥120 kg | |
| Cork divider pin retention performance | Holds ≥25 pinned paper notes/photos without surface tearing or pin hole enlargement after 1000 pin insertions | |
| Lateral stability: tilt angle before tipping | ≥12° | |
| Drawer slide cycle rating | ≥50000 full open/close cycles | |
| Drawer slide static load rating per drawer | ≥25 kg for shallow stationery drawer, ≥40 kg for deep filing drawer | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop panel | 25mm thick E1-grade melamine-faced particleboard with 2mm PVC edge banding | |
|---|---|---|
| Desk divider frame | 18mm thick dark brown melamine-faced MDF with rounded corners | |
| Divider tack surface | 6mm thick natural cork panel | |
| Outer support legs | 2mm thick powder-coated matte black steel angled splay legs with 10mm diameter steel cross-brace | |
| Storage cabinet carcass | 18mm thick dark charcoal melamine-faced particleboard with matte finish | |
| Drawer fronts | 18mm thick light beige melamine-faced MDF with recessed integrated black plastic handle | |
| Drawer slides | 3-section full-extension cold-rolled steel ball-bearing slides | |
| Adjustable feet | 20mm diameter black nylon height-adjustable glides, 10mm adjustment range | |
| Cable management grommet on divider | White ABS plastic 60mm diameter cable port | |
| Desk divider outer frame | 18mm thick dark brown melamine-faced MDF with rounded corner edges, secured with black plastic end caps at corners | |
| Storage pedestal carcass | 18mm thick dark charcoal matte melamine-faced particleboard, constructed with cam-lock fasteners for rigid box assembly | |
| Drawer front panels | 18mm thick light beige matte melamine-faced MDF, fitted with recessed integrated black ABS pull handles | |
| Drawer hardware | 3-section full-extension cold-rolled steel ball-bearing slides, zinc-plated corrosion-resistant finish | |
| Base leveling glides | 20mm diameter black nylon height-adjustable glides, 10 mm vertical adjustment range, fitted to all pedestal base corners | |
| Cable management components | White ABS plastic 60mm cable grommets fitted to divider frames, with below-desk space for optional 15kg load capacity steel cable tray | |
| Pedestal base support pads | 3mm thick black anti-slip rubber pads under glides, prevent floor scuffing and reduce movement during use | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Cork divider tack function | Accepts push pins to attach notes, photos and documents without damaging panel surface, provides 350mm high visual privacy between opposite-facing seats | |
|---|---|---|
| Storage drawer configuration (per pedestal) | 1 shallow stationery drawer for pens/small supplies, 1 deep filing drawer compatible with A4/legal suspension file folders | |
| Open CPU storage bay | Open under-desk bay between adjacent pedestals accommodates mid-tower desktop computers, with open rear for cable routing | |
| Cable management routing | Integrated cable grommet in divider frame routes power and data cables from worktop devices to below-desk area, with space in central cavity for cable trays | |
| Height-adjustable glides | Nylon glides at base of all pedestals adjust 10 mm to level the desk on uneven floors, prevents wobble | |
| Modular connection system | Units join with integrated steel connecting brackets to create extended workstation runs, no visible external fasteners on front surfaces | |
| Worktop edge ergonomics | Rounded front edges reduce forearm pressure during extended typing, 2mm PVC edge resists chipping from impact | |
| Leg footrest function | Horizontal steel cross-brace on outer angled legs acts as a fixed footrest for outer seat users | |
| Cork divider dual function | Provides 350mm high seated visual privacy between opposing face-to-face seats, and accepts push pins to attach notes, photos and documents without permanent panel damage, with visible pinned items demonstrating tack function in image | |
| Integrated pedestal storage (per unit) | Each two-drawer pedestal positioned between adjacent seats includes 1 shallow top drawer for small stationery and supplies, 1 deep bottom drawer compatible with A4/foolscap suspension hanging files, with full-extension slides for complete drawer access | |
| Open CPU storage bays | Two open unenclosed under-desk bays located between pedestals accommodate standard mid-tower desktop computers, with open rear panels for passive ventilation and unobstructed cable routing to worktop devices | |
| Integrated cable routing | 60mm diameter cable grommets in divider frames route power, monitor and data cables from worktop devices to below-desk area, with central under-worktop cavity space for mounting cable trays to contain loose cables | |
| Leveling adjustability | Nylon glides at all pedestal base points adjust 10 mm vertically to level the workstation on uneven finished floors, eliminating wobble during typing or equipment use | |
| Modular expandability | Adjacent workstation units connect via hidden steel connecting brackets to create extended linear runs of workstations, with no visible external fasteners on exposed front surfaces for a clean finish |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 4 cartons | |
|---|---|---|
| Largest carton dimensions (L×W×H) | 2850 × 650 × 100 mm | |
| Total shipping gross weight | 250 kg | |
| Total shipping volume (CBM) | 0.52CBM | |
| Assembly time on site | 2.5person-hours | |
| 20ft GP container loading quantity | 54units | |
| 40ft HQ container loading quantity | 128units | |
| Largest shipping carton dimensions (L×W×H) | 2850 × 650 × 110 mm | |
| Total shipping volume | 0.53CBM | |
| On-site assembly time | 2.5person-hours |
Recommended spaces / users / usage modes
| Open-plan office work areas | Suitable for 4-person teams in corporate open offices, provides dedicated individual work space with partial visual privacy to reduce distraction | |
|---|---|---|
| Start-up and co-working spaces | Two-tone neutral finish fits flexible co-working environments, integrated storage eliminates need for separate pedestals to save floor space | |
| Administrative and back-office departments | Filing drawer capacity supports document storage for admin, HR and finance roles, cork dividers allow easy pinning of reminders and to-do lists | |
| Call center and customer service zones | 700mm seat width provides sufficient space for monitor, keyboard and call center equipment, cable management keeps work surfaces uncluttered | |
| Project team work zones | Can be joined in runs to create larger team blocks, cork dividers support display of project schedules and notes for cross-team visibility | |
| Recommended paired seating | Pair with mid-back ergonomic office chairs with seat height range 520 mm to match 750mm worktop height for optimal seated ergonomics | |
| Open-plan corporate office areas | Suitable for 4-person operational teams in corporate open offices, provides dedicated individual work space with partial visual privacy to reduce cross-seat distraction while maintaining team visibility | |
| Start-up and co-working flexible spaces | Neutral two-tone dark/light finish fits flexible co-working environments, integrated storage eliminates need for separate rolling pedestals to reduce per-seat floor space footprint | |
| Recommended pairing configuration | Pair with mid-back ergonomic office chairs with 520 mm seat height adjustment range to match 750mm worktop height for optimal seated ergonomics, with 5-star base and casters suitable for hard or carpeted office floors |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Applies to safety and dimensional requirements for office work desks, specifies minimum worktop depth 600mm and leg clearance for seated use | |
|---|---|---|
| EN 12521:2015 | Applies to strength, durability and stability requirements for commercial office furniture, specifies load test levels for frequent use office workstations | |
| EN 13986:2004+A1:2015 | Applies to wood-based panel performance characteristics for use in furniture construction |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Applies to performance requirements for office desks, specifies worktop static load of 448N (100lbf) per seat position, drawer cycle testing of 50000 operations | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Applies to performance requirements for storage pedestals integrated into desks, specifies drawer load ratings and stability when drawers are fully extended |
Standards applicable to China-market projects
| GB/T 3326-2016 | Applies to dimensional tolerances and stability requirements for office desks, specifies minimum knee clearance height 600mm and worktop height range 760 mm for general office use | |
|---|---|---|
| GB 18580-2017 | Applies to formaldehyde emission limits for wood-based panels used in the desk carcass and worktop, requires E1 grade emission ≤0.124mg/m³ for indoor office furniture | |
| GB/T 10357.1-2013 | Applies to mechanical performance test methods for desks, specifies static load, impact and durability test procedures for work surfaces and storage components |
This product must meet the following technical requirements: 1. GB/T 3326-2016: Applies to dimensional tolerances and stability requirements for office desks, specifies minimum knee clearance height 600mm and worktop height range 760 mm for general office use; 2. GB 18580-2017: Applies to formaldehyde emission limits for wood-based panels used in the desk carcass and worktop, requires E1 grade emission ≤0.124mg/m³ for indoor office furniture; 3. GB/T 10357.1-2013: Applies to mechanical performance test methods for desks, specifies static load, impact and durability test procedures for work surfaces and storage components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
