| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2800 x 600 x 750 mm | |
|---|---|---|
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 85 kg | |
|---|---|---|
| Static worktop load capacity per seat | 120 kg | |
| Maximum supported users | 2 | |
| Adjustable foot leveling capacity | 15 mm | |
| Surface abrasion resistance | 2000 cycles | |
| Structure service life | 10 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop surface | 25mm E1-grade particleboard with matte white melamine laminate | |
|---|---|---|
| Left support frame | 1.5mm thick powder-coated steel cantilever leg | |
| Pedestal cabinet bodies | 0.8mm thick cold-rolled steel with white powder coating | |
| Drawer locks | Zinc alloy keyed cam locks, one per pedestal | |
| Cable management grommets | ABS plastic soft-seal grommets | |
| Central cable tray | Cold-rolled steel wire management tray under worktop center | |
| Leveling feet | Nylon base with steel threaded stem | |
| Pedestal modesty panels | Integrated steel panel covering seated leg area | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Work zone layout | Two independent seated positions separated by central cable management | |
|---|---|---|
| Lockable storage | One lockable storage pedestal per seating position | |
| Cable routing | Dual surface grommets plus under-desk central cable tray | |
| Floor leveling | Six adjustable nylon feet across frame and pedestals | |
| Storage configuration | One upper utility drawer per pedestal, open under-desk knee space | |
| Modular assembly | Bolt-connected frame and pedestal components | |
| Surface usability | Scratch-resistant matte melamine finish resists office wear | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 3 | |
|---|---|---|
| Largest shipping carton dimensions | 2850 x 650 x 120 mm | |
| Total shipping gross weight | 95 kg | |
| Total shipment volume | 0.32 CBM | |
| On-site assembly time | 60 minutes | |
| 20ft GP container loading quantity | 82 units | |
| Packaging protection | 5-layer corrugated carton with EPS edge foam | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately |
Recommended spaces / users / usage modes
| Open plan office spaces | Supports two staff per unit to maximize dense workspace layouts | |
|---|---|---|
| Call center and admin work areas | Durable surface and integrated storage for daily high-frequency use | |
| Training room installations | Uniform dimensions allow rowed arrangement for group training setups | |
| Small startup offices | Compact dual-seat design provides cost-effective workstations for small teams |
EU Market Access Requirements* EN Standards
| Office furniture stability | EN 527:2002 office work desk stability | |
|---|---|---|
| Surface wear resistance | EN 14322:2017 melamine board abrasion | |
| Steel component corrosion resistance | EN 13722:2004 metal furniture coating |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.5 |
|---|
Standards applicable to China-market projects
| Worktop formaldehyde emission | GB/T 39600E1 grade | |
|---|---|---|
| Structural strength test | GB/T 10357.1desk mechanical performance | |
| Coating adhesion requirement | GB/T 4893.4furniture surface adhesion |
This product must meet the following technical requirements: 1. Worktop formaldehyde emission: GB/T 39600E1 grade; 2. Structural strength test: GB/T 10357.1desk mechanical performance; 3. Coating adhesion requirement: GB/T 4893.4furniture surface adhesion; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
