| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall unit dimensions | 1400 mm W × 700 mm D × 750 mm H (work surface height) | |
|---|---|---|
| Cork privacy divider dimensions | 1100 mm L × 380 mm H (above desk surface) × 10 mm T | |
| Attached side storage cabinet dimensions | 420 mm W × 700 mm D × 720 mm H | |
| Central seated knee clearance | 780 mm W × 680 mm H × 550 mm D | |
| Upper storage drawer dimensions | 380 mm W × 150 mm H × 500 mm internal D | |
| Middle open CPU/printer cubby dimensions | 380 mm W × 400 mm H × 500 mm D | |
| Lower enclosed cabinet dimensions | 380 mm W × 500 mm H × 500 mm internal D | |
| Desktop thickness | 25 mm | |
| Desktop edge banding thickness | 2 mm | |
| Steel A-frame leg tubing dimensions | 50 mm × 30 mm rectangular section, 1.2 mm wall thickness | |
| Adjustable foot height adjustment range | 15 mm | |
| Cork panel substrate thickness | 8 mm | |
| Attached right-side storage pedestal dimensions | 420 mm W × 700 mm D × 720 mm H | |
| Upper shallow storage drawer internal dimensions | 380 mm W × 150 mm H × 500 mm internal D | |
| Middle open CPU/accessories cubby dimensions | 380 mm W × 400 mm H × 500 mm D | |
| Lower enclosed cabinet internal dimensions | 380 mm W × 500 mm H × 500 mm internal D | |
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat |
Net weight / load capacity / users / durability
| Product net weight range | 62 kg | |
|---|---|---|
| Desktop static uniform load capacity | 80 kg | |
| Work surface abrasion resistance | ≥10,000 abrasion cycles | |
| Frame lateral stability load | 40 kg horizontal force at desktop edge | |
| Seating capacity | 1 person | |
| Cork pinboard holding capacity | Holds standard push pins for up to 12 A4-sized pinned notes | |
| Cabinet door hinge durability | ≥40,000 open/close cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Work surface | 25mm melamine-faced particleboard core, warm woodgrain finish, 2mm light off-white ABS edge banding | |
|---|---|---|
| A-frame support leg | 1.2mm wall thickness powder-coated dark grey steel, welded cross-brace between leg sections, black PP adjustable leveling feet | |
| Cork privacy divider | 10mm thick natural cork pinning surface, brown upholstered/laminated frame border, mounted to rear desktop with grey metal brackets | |
| Side cabinet carcase | 18mm melamine-faced particleboard, dark charcoal grey finish on internal/exposed sides, light off-white finish on drawer and door fronts | |
| Upper drawer | 16mm melamine-faced engineered wood drawer box, side-mounted epoxy-coated steel drawer slides, black plastic integrated handle | |
| Lower cabinet door | 16mm melamine-faced engineered wood door, single black plastic/metal pull handle, magnetic catch for closed position | |
| Hardware fasteners | Zinc-plated steel cam locks, bolts, and barrel nuts for KD assembly | |
| Leveling feet | Injection-molded black polypropylene base with TPR rubber anti-slip pad, 15mm threaded steel adjustment stud | |
| Cabinet base trim | 1mm thick dark grey PVC kickplate along cabinet bottom edge, prevents scuffing from floor cleaning equipment | |
| Side pedestal carcase | 18mm melamine-faced particleboard, dark charcoal grey finish on internal/rear/exposed side panels, light off-white finish on drawer and door fronts | |
| Upper drawer assembly | 16mm melamine-faced engineered wood drawer box, side-mounted epoxy-coated steel drawer slides, black ABS integrated recessed pull handle | |
| Pedestal base trim | 1mm thick dark grey PVC kickplate along pedestal bottom edge, flush-fitted to prevent scuffing from floor cleaning equipment and chair bases | |
| Cross-brace footrest bar | 25mm diameter powder-coated steel horizontal bar connecting the two lower points of the A-frame leg, doubles as a footrest for seated users | |
| Cable grommet trim | Injection-molded black ABS trim ring lining the pedestal cable cutout, smooth edge to prevent cable insulation damage | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Storage layout | Three-zone side storage: 1 upper shallow drawer for small stationery, 1 middle open cubby for CPU/printer access, 1 lower door-enclosed cabinet for large item storage | |
|---|---|---|
| Drawer operation | 3/4 extension side-mounted steel slides, smooth pull-out action without sagging under 15kg load, no lock fitted as standard | |
| Cork divider function | Vertical rear desktop pinboard for pinning notes, reminders, and documents, provides 380mm high visual privacy between adjacent workstations in open-plan offices | |
| Leveling adjustment | 15mm height adjustment on each A-frame leg foot, rotated by hand to compensate for uneven floor surfaces and eliminate desk wobble | |
| Cable management access | 60mm diameter rear cable cutout at cabinet base, allows routing of power and data cables from floor to desktop devices | |
| Cabinet door operation | Single-side hinged door, 110-degree opening angle, magnetic catch holds door closed when not in use, pull handle for easy access | |
| Surface cleanability | Stain-resistant melamine work surface, wipeable with mild detergent and damp cloth, resistant to common office liquid spills (coffee, water, ink) | |
| Assembly structure | Knock-down (KD) flat-pack construction, cam-lock and bolt assembly between desktop, leg frame, and cabinet unit, no permanent on-site welding or gluing required | |
| Three-zone integrated storage layout | Right-side pedestal provides 1 upper shallow drawer for small stationery/pens, 1 middle open cubby for mid-tower CPU/printer access, 1 lower door-enclosed cabinet for personal item/bag storage | |
| Cable management routing | 60mm diameter rear cable cutout at open cubby base, allows routing of power and data cables from floor outlets to desktop monitors, laptops, and peripherals without pinching | |
| Cross-brace footrest | Horizontal steel cross brace positioned 250mm above floor level between A-frame legs, provides a stable elevated surface for resting feet during extended seated work | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Packaging format | 3 flat-pack cartons (desktop pack, steel leg/hardware pack, cabinet component pack) | |
|---|---|---|
| Desktop pack dimensions and weight | 1470 mm L × 760 mm W × 70 mm H, 28 kg gross weight | |
| Leg/hardware pack dimensions and weight | 820 mm L × 260 mm W × 120 mm H, 12 kg gross weight | |
| Cabinet pack dimensions and weight | 750 mm L × 460 mm W × 180 mm H, 18 kg gross weight | |
| Total packaged volume | 0.19 m³ | |
| Total packaged gross weight | 58 kg | |
| Assembly time (single person) | 90 minutes | |
| 40ft HQ container loading quantity | 240units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Open-plan office staff workstations | Sized for single user in open office layouts, cork divider provides visual privacy between adjacent desks without full partition walls | |
|---|---|---|
| Home office dedicated workspaces | Fits in home study rooms, provides dedicated computer work surface and integrated storage to reduce separate furniture needs | |
| Startup and co-working spaces | Modern two-tone aesthetic matches flexible co-working interiors, pinboard divider allows personalization of individual work spots | |
| Small business administrative offices | Integrated CPU cubby and filing storage eliminates need for separate under-desk pedestals, saves floor space in compact offices | |
| Call center and open workspace rows | Designed to be placed in linear rows with identical units, consistent 1400mm width supports standardized workspace planning | |
| Startup and co-working flexible spaces | Modern two-tone aesthetic matches flexible co-working interiors, lockable upper drawer supports secure personal storage for rotating users, pinboard divider allows personalization of individual work spots |
EU Market Access Requirements* EN Standards
| EN 527-2:2002 | Office furniture - Work tables and desks - Part 2: Mechanical safety requirements, applicable to structural stability, edge rounding, and load safety for fixed-height office desks | |
|---|---|---|
| EN 527-3:2003 | Office furniture - Work tables and desks - Part 3: Test methods for stability and mechanical strength, applicable to verifying static load, drawer, and leg performance | |
| EN 15372:2016 | Furniture - Strength, durability and safety - Requirements for non-domestic storage furniture, applicable to the strength and durability of the integrated side cabinet |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Office Furniture - Desks, applicable to static load, cycle testing, stability, and leg strength requirements for commercial-grade office workstations used 8 hours per day | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Office Furniture - Storage Units, applicable to drawer slide cycle testing, shelf load, and door hinge durability for the integrated pedestal cabinet |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional tolerances, surface finish quality, and structural strength of engineered wood desk and cabinet components | |
|---|---|---|
| GB/T 3327-2016 | Office furniture - desks, applicable to work surface height, load capacity, stability, and durability requirements for commercial office workstations | |
| GB 18580-2017 | Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels, required E1 grade (≤0.124mg/m³) for engineered wood components used in indoor office spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional tolerances, surface finish quality, and structural strength of engineered wood desk and cabinet components; 2. GB/T 3327-2016: Office furniture - desks, applicable to work surface height, load capacity, stability, and durability requirements for commercial office workstations; 3. GB 18580-2017: Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels, required E1 grade (≤0.124mg/m³) for engineered wood components used in indoor office spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
