| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 4800 x 1600 x 750 mm | |
|---|---|---|
| Per-workstation width | 1600 mm | |
| Per-side worktop depth | 800 mm | |
| Seated knee clearance height | 600 mm | |
| Privacy divider height above worktop | 350 mm | |
| Privacy divider thickness | 32 mm | |
| Worktop thickness | 25 mm | |
| Edge banding thickness | 2 mm | |
| Integrated pedestal dimensions | 404 x 520 x 600 mm | |
| Steel leg tube thickness | 2 mm | |
| Levelling foot adjustment range | 15 mm | |
| CPU storage slot dimensions | 250 x 500 x 500 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Per-workstation static load capacity | 135 kg | |
|---|---|---|
| Per-pedestal drawer static load | 30 kg | |
| Total assembly static load | 810 kg | |
| Worktop surface scratch resistance | 2000 cycles | |
| Recommended user capacity | 6 people | |
| Product net weight (total) | 380 kg | |
| Drawer lock cycle durability | 10000 cycles | |
| Frame rust resistance | 500 hours salt spray | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop panel | 25mm E0 grade melamine-faced particleboard | |
|---|---|---|
| Worktop edge trim | 2mm impact-resistant PVC edge banding | |
| Support frame and legs | 2mm powder-coated off-white steel with angled tapered profile | |
| Privacy divider core | 32mm polyester fiber acoustic panel | |
| Privacy divider upholstery | Woven polyester fabric with light gray matte finish | |
| Pedestal cabinet body | 0.7mm cold-rolled steel with off-white powder coat | |
| Drawer slides | Full-extension ball-bearing steel slides | |
| Levelling feet | Reinforced nylon with steel threaded stem | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Modular connection system | Pre-drilled steel brackets link adjacent desk sections for layout expansion | |
|---|---|---|
| Cable management access | Scalloped cutouts at worktop rear route power/data cables below surface | |
| Pedestal drawer locking system | Central key lock secures all 3 drawers per pedestal to secure personal items | |
| Anti-tilt drawer mechanism | Prevents opening more than one drawer at a time to avoid tip-over risk | |
| Height-adjustable levelling feet | 15mm travel compensates for uneven floors to keep worktop level | |
| CPU open storage slots | Adjacent open compartments between pedestals house desktop computer towers | |
| Privacy divider mounting | Bracket-fixed dividers sit centrally between opposite seats to reduce visual distraction | |
| Surface stain resistance | Thermally fused melamine finish resists common office liquid spills and stains | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Open plan office areas | Provides dedicated individual workspaces with reduced visual distraction for teams of 6 | |
|---|---|---|
| Co-working flexible offices | Modular construction allows reconfiguration as team sizes change | |
| Corporate staff work zones | Integrated storage saves floor space for administrative and operational teams | |
| Startup office environments | Modern minimalist aesthetic matches contemporary office interior design schemes | |
| Call center work floors | Consistent standardized seating positions support high-density staff deployment | |
| Recommended pairing | Match with mesh-back height-adjustable task chairs on casters for ergonomic use |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 | Office worktables safety and strength requirements | |
|---|---|---|
| EN 527-2:2016 | Office worktables dimensional safety and strength requirements | |
| EN 1335-2:2009 | Office chair safety requirements |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Desk products performance and durability standard | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Storage cabinets and pedestals performance standard | |
| ANSI/BIFMA M7.1-2020 | Standard test method for furniture VOC emissions |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden office furniture | |
|---|---|---|
| GB/T 3325-2017 | Metal office furniture general technical requirements | |
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden office furniture; 2. GB/T 3325-2017: Metal office furniture general technical requirements; 3. GB 18580-2017: Formaldehyde emission limits for wood-based panels; 4. GB/T 10357.1-2013: Furniture mechanical performance test for tables; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
