纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 600 × 450 mm
Top panel thickness	12 mm
Metal frame tube diameter	12 mm
Lower shelf clearance from floor	80 mm
Vertical gap between top surface and lower shelf	250 mm
Lower shelf usable depth	520 mm
Floor contact foot pad diameter	20 mm
Top surface overhang beyond frame	10 mm
Vertical bar spacing on side frames	45 mm
Outer perimeter frame tube section	20 x 20 mm square tube
Side support round tube diameter	12 mm
Lower shelf slat tube diameter	10 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	28 kg
Top surface static load capacity	80 kg
Recommended number of users	4
Frame anti-rust coating durability	500 hours salt spray resistance
Top surface scratch resistance	6 Mohs
Recommended serving capacity	4 users
Frame powder coating salt spray durability	500 hours
Frame weld joint static load failure threshold	150 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Top surface panel	White marble-look sintered stone, polished finish, rounded polished edges
Outer perimeter frame	Matte black powder-coated carbon steel, 20 x 20 mm square tube section
Side support structure	Matte black powder-coated carbon steel, 12 mm diameter round tube, U-shaped bent profile
Lower storage shelf	Matte black powder-coated carbon steel, 10 mm diameter round tube, parallel slat construction
Cross support beams	Matte black powder-coated carbon steel rectangular tube, welded under lower shelf
Floor contact pads	Black non-slip PE plastic, bonded to frame base feet
Frame weld joints	Ground and smooth finished, powder coated to match frame color
Outer perimeter top frame	Matte black powder-coated carbon steel, 20 x 20 mm square tube, 1.2 mm wall thickness
Lower storage shelf slats	Matte black powder-coated carbon steel, 10 mm diameter round tube, parallel slat construction, welded to side U-frames
Assembly hardware	M6 black zinc-plated steel countersunk screws, 8 pieces total, with pre-threaded weld nuts on frame
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Top surface function	Flat smooth work/display surface suitable for placing drinkware, magazines, remote controls and decorative display items
Lower shelf storage	Open slatted shelf for open storage of books, magazines, throw blankets and small living room accessories
Stability design	Four-point floor contact with integrated anti-slip pads to prevent sliding on hard flooring and rugs
Surface maintenance	Non-porous sintered stone top resists common household liquid stains, requires only damp cloth wiping for regular cleaning
Assembly structure	Knock-down construction with frame and top panel assembled via hidden screws under the top perimeter
Floor protection	Raised 80mm clearance under lower shelf allows easy cleaning under the table with standard robot vacuums
Floor cleaning access	80 mm under-shelf clearance allows passage of standard robot vacuums up to 75 mm height for full under-table cleaning
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping packages	1
Packed carton dimensions	1280 x 680 x 160 mm
Gross shipping weight	32 kg
Shipping volume per unit	0.14 CBM
Assembly time	30 minutes
20ft container loading quantity	190 units
40HQ container loading quantity	480 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Small apartment reception space	Compact 1200mm length fits small studio or open-plan living areas without occupying excessive floor space
Office lounge/waiting area	Suitable for placement in staff break rooms or client reception waiting areas for serving refreshments and reading materials
Modern minimalist interior schemes	Matte black frame and white marble-look top coordinates with contemporary, industrial and Scandinavian interior design palettes
Small apartment living space	1200 mm compact length fits 3seater sofa arrangements in studio or open-plan living areas without occupying excessive floor space
Office lounge and waiting area	Suitable for staff break rooms, informal meeting zones and client reception waiting areas for serving refreshments and reading materials
Modern minimalist residential interiors	Matte black frame and white marble-look top coordinates with contemporary, industrial and Scandinavian interior design palettes
Rental property furnishing	Durable, low-maintenance construction suitable for short-term rental and furnished apartment installations

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture: Strength, durability and safety for domestic tables, applicable as structural performance acceptance standard for residential use
EN 15187:2007	Furniture: Assessment of surface resistance to cold liquids, applicable for stain resistance acceptance of the table top

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional tolerance, edge finishing and structural stability requirements for tables
GB/T 4893.4-2013	Surface wear resistance test for furniture surfaces, applicable as acceptance standard for the sintered stone top panel
GB/T 10357.1-2013	Mechanical property test for tables: strength and stability, applicable for static load and stability acceptance of the complete table structure
GB 18584-2001	Limit of harmful substances in wood furniture, applicable for formaldehyde emission limits if composite substrate is used under the stone top
GB/T 4893.1-2005	Test for surface resistance to cold liquids, applicable for stain resistance acceptance of the table top

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional tolerance, edge finishing and structural stability requirements for tables；
2. GB/T 4893.4-2013：Surface wear resistance test for furniture surfaces, applicable as acceptance standard for the sintered stone top panel；
3. GB/T 10357.1-2013：Mechanical property test for tables: strength and stability, applicable for static load and stability acceptance of the complete table structure；
4. GB 18584-2001：Limit of harmful substances in wood furniture, applicable for formaldehyde emission limits if composite substrate is used under the stone top；
5. GB/T 4893.1-2005：Test for surface resistance to cold liquids, applicable for stain resistance acceptance of the table top；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-MR12060-BKM

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-MR12060-BKM

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-MR12060-BKM打开导出工具

页面快速操作

发布采购询价

产品描述

This modern rectangular coffee table features a sleek, balanced silhouette defined by a white marble-effect sintered stone top paired with a matte black powder-coated steel frame. The polished top has softly rounded edges and a subtle overhang around the perimeter frame, while open U-shaped vertical side bars create a light, visually unobtrusive structure. A parallel slatted lower shelf sits beneath the top, with evenly spaced metal bars that maintain the piece’s airy aesthetic while adding functional storage. Anti-slip PE pads sit at each of the four frame base corners, sitting flush with the floor to anchor the piece without visible protrusions.
The table’s construction balances durability and streamlined design. The top is a polished sintered stone panel, while the support structure uses square steel tube for the outer top border and round steel tube for side supports and lower shelf slats, with all welds ground smooth and finished to match the frame’s matte black coating for a seamless appearance. Hidden countersunk screws secure the top to the frame, eliminating visible hardware on the finished product, while cross support beams under the lower shelf prevent sagging under regular use.
Functionally, the smooth non-porous top provides a stable, easy-to-clean surface for drinkware, reading materials, remote controls, and decorative displays, resisting stains from common household spills that wipe away with a simple damp cloth. The open slatted lower shelf offers accessible storage for books, throw blankets, and living room accessories, with slat spacing that promotes air circulation and reduces dust buildup. The 80mm clearance under the lower shelf accommodates standard robot vacuums for unobstructed under-table cleaning, and the four-point contact base with anti-slip pads prevents sliding on both hard flooring and area rugs without requiring wall anchoring.
This piece works equally well in residential and light commercial settings. Its compact length fits small studio apartments, open-plan living areas, and seating arrangements paired with three-seater sofas, while its neutral two-tone finish complements contemporary, industrial, and Scandinavian interior palettes. It is also suited for office break rooms, informal meeting zones, and client waiting areas, as its scratch-resistant top and rust-protected frame hold up to regular high-traffic use, and its low-maintenance surface makes it a practical choice for short-term rental properties.
For procurement, note the table ships in knock-down flat-pack form, with all required hardware included for single-person assembly with no special tools. The product supports seating for up to four users, with a static load rating suited for everyday living room items, and all material gauges and final packaging configurations should be confirmed directly with suppliers prior to bulk ordering. Container loading quantities are calculated for standard freight planning, making the model suitable for both small residential furnishing projects and larger commercial fit-outs.

Modern Rectangular Coffee Table with White Marble Effect Top and Black Metal Frame Specifications

供应商与现货