纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1100 × 560 × 480 mm
Overall assembled dimensions	1100 x 560 x 480 mm
Tabletop thickness	25 mm
Tabletop corner radius	30 mm
Leg tubular section size	40 x 20 mm
Metal base wall thickness	1.5 mm
Floor clearance under tabletop	455 mm
Base footprint width	520 mm
Base footprint length	1040 mm
Under-table knee clearance height	420 mm
Non-slip foot pad diameter	25 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop static distributed load capacity	91 kg
Net product weight	8.5 kg
Top surface impact resistance	1.2 J
Metal frame static load per leg	30 kg
Finish abrasion resistance (tabletop)	2000 cycles
Powder coat finish scratch resistance (base)	3H pencil hardness
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop core	High-density MDF engineered wood board
Tabletop surface	White grey-veined faux marble thermofused laminate
Support frame and legs	Cold-rolled steel tubing
Metal finish	Matte black electrostatic powder coating
Foot pads	TPU non-slip non-marking protective pads
Assembly hardware	Zinc-plated steel bolts and barrel nuts
Cross support bar	Same rectangular steel tubing as leg sections
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Floor protection	Non-slip TPU pads on each leg to prevent scuffing and sliding on hard floors or rugs
Impact safety	Rounded tabletop corners to reduce injury risk from bumps in high-traffic living areas
Assembly requirement	Flat-pack assembly with included hex key and illustrated instructions
Frame stability	Central cross-braced geometric leg structure eliminates wobble on level surfaces
Surface maintenance	Water-resistant non-porous top wipes clean with damp cloth, no special sealant required
Level adjustment	Fixed foot pads accommodate minor floor unevenness up to 2 mm
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary application space	Residential living rooms positioned in front of sectional or standard sofas
Suitable room size	Small to medium living areas 25sqm
Design style compatibility	Modern, minimalist, industrial, and contemporary interior schemes
Recommended complementary furniture	Low-pile area rugs, fabric or leather modular sofas, neutral-toned accent seating
Commercial secondary use	Office lounge breakout areas, hotel reception waiting zones

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture – Strength, durability and safety for domestic tables, applicable to load and stability testing
EN 13722:2004	Furniture – Test methods for surface finishes, applicable to laminate top abrasion and stain resistance
EN 1022:2005	Furniture – Seating – Determination of stability, referenced for adjacent seating area use safety

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop core and finish performance
GB/T 24821-2009	Performance requirements for metal furniture frames, applicable to steel base structural integrity
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to MDF core formaldehyde emissions

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to tabletop core and finish performance；
2. GB/T 24821-2009：Performance requirements for metal furniture frames, applicable to steel base structural integrity；
3. GB 18584-2001：Limit of harmful substances in wooden furniture, applicable to MDF core formaldehyde emissions；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-WFM-BKGB-1100

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-WFM-BKGB-1100

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-WFM-BKGB-1100打开导出工具

页面快速操作

发布采购询价

产品描述

This rectangular coffee table, model CT-WFM-BKGB-1100, features a sleek, minimalist modern aesthetic defined by clean lines and a balanced, open geometric form. Its tabletop is finished with soft 30mm rounded corners, elevated by a matte black geometric metal base that creates a light, airy visual profile without overwhelming surrounding furnishings. The structure pairs a 25mm thick top (with 40mm composite load-bearing build-up) edged with 2mm banding, sitting 480mm high with 455mm of floor clearance beneath. The base uses a central cross-braced frame of 40x20mm steel tubing with 1.5mm wall thickness, spanning a 1040mm long by 520mm wide footprint to align cleanly with the 1100mm by 560mm tabletop dimensions.
The tabletop core is made of high-density MDF engineered wood, surfaced with white grey-veined faux marble thermofused laminate that delivers scratch resistance, 2000-cycle abrasion resistance, 1.2J impact resistance, and a water-resistant non-porous finish that requires no special sealant, wiping clean easily with a damp cloth. The frame and legs are constructed from cold-rolled steel tubing finished with matte black electrostatic powder coating rated to 3H pencil hardness for scratch resistance, connected with zinc-plated steel bolts and barrel nuts, and fitted with TPU non-slip non-marking foot pads that prevent scuffing, reduce sliding, and accommodate minor floor unevenness up to 2mm. The cross-braced base eliminates wobble on level surfaces, supporting a 91kg static distributed tabletop load (150kg uniform reference capacity) with 30kg static load per leg. Each leg includes protective pads for hard floors and rugs, while the rounded corners reduce bump-related injury risk in high-traffic areas; an integrated cable management tray holds up to 10 power or data cables with a 10kg load capacity. The table ships as a flat pack across two cartons, with an included hex key and illustrated instructions supporting a 40-minute assembly time, and weighs 8.5kg net.
Ideal for primary use in residential living rooms up to 25 square meters positioned in front of standard or sectional sofas, this table complements modern, minimalist, industrial, and contemporary interiors, pairing seamlessly with low-pile area rugs, fabric or leather modular sofas, and neutral-toned accent seating. It also works well for secondary commercial use in office lounge breakout areas and hotel reception waiting zones. Procurement teams should note it is sold unbranded, with packaged sets weighing 90kg total across two cartons occupying 0.55 cubic meters of shipping volume.

Rectangular White Faux Marble Coffee Table with Black Geometric Metal Base Specifications

供应商与现货