纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2134 × 1118 × 750 mm
Tabletop thickness	20 mm
Umbrella hole diameter	57 mm
Center recessed tray compartment dimensions	610 x 406 x 38 mm
Apron height below tabletop	127 mm
Leg span lengthwise	1829 mm
Leg span widthwise	813 mm
Knee clearance height under apron	623 mm
Corner radius	50 mm
Edge trim width	25 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	35 kg
Distributed tabletop static load	136 kg
Center point load capacity	45 kg
Seating capacity	6 persons
Powder coating thickness	80 um
Recommended cover weight capacity	23 kg
Frame rust resistance lifespan	5 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop frame and lattice	Sand-cast aluminum alloy
Surface finish	Multi-step antique bronze powder coat
Apron assembly	Cast aluminum with scroll openwork
Support legs and base crossbars	Thick-walled cast aluminum tubing
Center recessed tray insert	Black matte food-grade plastic liner
Umbrella hole cap	Matching cast bronze aluminum plug
Assembly fasteners	Stainless steel 8mm hex bolts
Foot pads	Non-marking rubber caps
Surface texture	Hammered embossed cast texture
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Umbrella hole function	Accepts standard patio umbrellas up to 57mm pole diameter
Center inset compartment	Functions as ice bucket or serving tray with removable liner
Surface drainage	Open lattice tabletop design allows rainwater to drain freely
Assembly requirement	Knock-down assembly with included hardware and hex key
Weather performance	Withstands full sun, rain and humidity exposure without rusting
Seating access	Uniform 711mm edge clearance per seat position
Leveling capability	Adjustable rubber foot pads compensate for uneven patio surfaces
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packaging note	Engineering , not supplier-measured data
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio application	Suitable for backyard, garden or covered porch dining areas
Commercial outdoor use	Applicable for restaurant sidewalk patios and cafe outdoor seating
Climate suitability	Performs well in coastal, rainy and high-humidity environments
Recommended pairing	Pairs with 6 cast aluminum patio armchairs with weatherproof cushions
Surface compatibility	Safe for stone paver, concrete, wood deck and tile patio surfaces
Maintenance requirement	Wipe clean with damp cloth; use fitted cover when not in use
Use function	Supports casual dining, tea service and small outdoor gatherings

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 581-1:2017	Outdoor furniture seating and table safety general requirements reference for procurement
EN 581-3:2017	Outdoor table mechanical safety and structural performance test criteria reference

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 24821-2009	Outdoor furniture metal table mechanical performance test reference for load and stability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 24821-2009：Outdoor furniture metal table mechanical performance test reference for load and stability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · ODT-CA-6S-RECT-BRZ-ICE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · ODT-CA-6S-RECT-BRZ-ICE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · ODT-CA-6S-RECT-BRZ-ICE打开导出工具

页面快速操作

发布采购询价

产品描述

The 6-Seat Antique Bronze Cast Aluminum Rectangular Outdoor Patio Dining Table features a classic ornamental design tailored for open-air dining settings, with a rectangular form that delivers consistent edge clearance for each of its six seating positions. Its visual profile is defined by ornate scroll openwork on the apron and an open lattice tabletop, finished in a multi-step antique bronze powder coat with a hammered embossed cast texture that lends a timeless, curated aesthetic to exterior spaces. Every structural component is built for long-term outdoor use: the tabletop frame and lattice are formed from sand-cast aluminum alloy, the apron uses cast aluminum with detailed scroll cutouts, and support legs with base crossbars are constructed from thick-walled cast aluminum tubing. All assembly fasteners are 8mm stainless steel hex bolts, feet are fitted with non-marking rubber caps that adjust to compensate for uneven surfaces, and the 80um thick powder coating delivers a 5-year frame rust resistance lifespan. Functional details are engineered for real-world outdoor use: the 20mm thick tabletop includes a 57mm umbrella hole fitted with a matching cast bronze aluminum plug, sized to accommodate standard patio umbrellas, and a central recessed compartment lined with a removable black matte food-grade plastic insert that operates as either an ice bucket or serving tray. The open lattice tabletop allows rainwater to drain freely, eliminating standing water after precipitation, and the 623mm knee clearance under the apron ensures comfortable seating for all guests. The table supports a 136kg distributed static load across its surface, a 45kg center point load, and can safely support a 23kg fitted protective cover when not in use. It is suited for both residential spaces including backyards, gardens and covered porches, and commercial settings such as restaurant sidewalk patios and cafe outdoor seating areas, performing reliably in coastal, rainy and high-humidity climates, and is safe for placement on stone paver, concrete, wood deck and tile surfaces. It pairs ideally with six matching cast aluminum patio armchairs fitted with weatherproof cushions. For procurement, note that the unit ships knock-down in two cartons, with all required hardware and a hex key included for assembly that takes 40 minutes per set; total packaged gross weight is 90kg across the two cartons. Maintenance requires only wiping with a damp cloth, and use of a fitted cover during extended periods of non-use is recommended. The unbranded model carries no third-party supplier certification beyond its stated rust-resistant construction, and all published dimensional data reflects engineering measurements rather than supplier-verified packaging values. Assembly is required on site, and adjustable feet remove the need for additional shims on uneven exterior flooring.

6-Seat Antique Bronze Cast Aluminum Rectangular Outdoor Patio Dining Table Specifications

供应商与现货