纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	940 × 940 × 711 mm
Overall table dimensions	940 x 940 x 711 mm
Table apron to floor clearance	676 mm
Table slat top thickness	35 mm
Chair seat height from floor	432 mm
Chair seat usable dimensions	495 x 457 mm
Chair backrest height above seat	508 mm
Chair armrest height from floor	635 mm
Pedestal cross base footprint	610 mm wide cross spread
Metal frame tube diameter	32 mm
Slat width for table and chairs	60 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static load capacity per chair	159 kg
Chair stacking height capacity	8 chairs high
Whole set packaged gross weight	73 kg
UV resistant coating durability	1500 hours
Chair frame corrosion resistance rating	1000 hours salt spray
Slat surface static friction coefficient	0.6
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Table and chair frame construction	1.2mm thick carbon steel tube with black powder coating
Table and chair slat panels	1.0mm thick powder-coated steel horizontal slats, riveted to frame
Table central pedestal base	Thick-walled steel column with cross-shaped steel foot base
Chair leg bottom glides	Injection-molded non-scratch plastic floor glides
Surface finish system	Electrophoretic primer plus black polyester powder topcoat
Hardware fasteners	Stainless steel bolts, nuts and washers for all assembly joints
Armrest construction	Curved integrated steel tube armrests matching frame finish
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Chair stackable storage	Armchairs nest vertically for off-season storage, up to 8 units per stack
Water shedding slat design	Gapped horizontal slats drain rainwater immediately to prevent pooling
Quick assembly hardware	All joints use knockdown bolted connections with included hex key
Leveling stability on hard surfaces	Pedestal cross base provides four contact points for even weight distribution
All-weather outdoor use	Coated metal construction resists rain, sun exposure and mild temperature extremes
Easy wipe-clean maintenance	Smooth powder-coated surfaces wipe clean with water and mild detergent
Fixed dining position design	Stationary non-swivel, non-rocking chairs for stable upright dining posture
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio and deck use	Suitable for small home decks, courtyards and balcony dining spaces
Small balcony bistro dining	Appropriate for apartment balconies requiring weatherproof, stackable seating
Commercial outdoor cafe seating	Suitable for low-traffic cafe, kiosk or beer garden casual dining use
Poolside lounge dining	Resistant to occasional water splashes and humid poolside environments
Rooftop terrace installation	Lightweight but stable construction works for weight-limited rooftop outdoor spaces
Four-person casual tea or coffee service	Square table layout evenly serves four place settings for drinks and light meals

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use	Applicable as general safety and performance standard for domestic outdoor dining sets
EN 581-2:2019 Outdoor furniture - Mechanical safety requirements for seating	Applicable for verifying chair static load, stability and durability performance
EN 581-3:2019 Outdoor furniture - Mechanical safety requirements for tables	Applicable for verifying table static load, stability and structural integrity

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for furniture	Applicable as structural safety and dimensional tolerance acceptance baseline for metal outdoor furniture
GB/T 1732-2020 Determination of impact resistance of paint films	Applicable for verifying coating durability against impact from mugs or tableware
GB/T 1865-2009 Paints and varnishes - Artificial weathering exposure	Applicable for validating UV and weather resistance of the black powder coat finish

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for furniture：Applicable as structural safety and dimensional tolerance acceptance baseline for metal outdoor furniture；
2. GB/T 1732-2020 Determination of impact resistance of paint films：Applicable for verifying coating durability against impact from mugs or tableware；
3. GB/T 1865-2009 Paints and varnishes - Artificial weathering exposure：Applicable for validating UV and weather resistance of the black powder coat finish；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OD-BSQ-700-4CH-BLK

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OD-BSQ-700-4CH-BLK

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OD-BSQ-700-4CH-BLK打开导出工具

页面快速操作

发布采购询价

产品描述

The 4-Seater Black Slatted Metal Outdoor Patio Bistro Dining Set, model OD-BSQ-700CH-BLK, is an unbranded all-metal outdoor dining configuration built for reliable casual use across residential and light commercial settings. Visually, the set features a cohesive minimalist silhouette anchored by a square slatted table paired with four matching armchairs, finished in a uniform matte black. The table rests on a central pedestal with a cross-shaped foot base that creates four even ground contact points, eliminating obstructive leg placements around the table perimeter to maximize usable seating space for four place settings. Horizontal, evenly gapped slats form the tabletop and chair seating and back surfaces, creating a streamlined, open visual profile that complements modern and casual outdoor design schemes. Construction relies on durable metal components engineered for outdoor exposure: frames are built from 1.2mm thick carbon steel tubing, while table and chair slat panels use 1.0mm thick powder-coated steel riveted securely to the frame structure. The table’s central support uses a thick-walled steel column paired with the cross-shaped steel foot base, and armrests are formed from curved integrated steel tubing matched to the frame’s finish. All assembly joints use stainless steel bolts, nuts, and washers, with at least two fixing points at major connections, and chair legs are fitted with injection-molded non-scratch plastic glides to protect hard flooring surfaces. The finish system combines an electrophoretic primer with a black polyester powder topcoat, delivering 1000 hours of salt spray corrosion resistance for chair frames and 1500 hours of UV coating durability, with six total finish options available for selection. Each chair supports a static load of 159 kg, and slat surfaces feature a 0.6 static friction coefficient to prevent items from sliding during use. Practical design features support long-term convenient use: gapped horizontal slats shed rainwater immediately to prevent pooling, while smooth powder-coated surfaces wipe clean easily with water and mild detergent. The non-swivel, non-rocking chairs maintain a stable upright dining posture, and nest vertically for compact off-season storage, with a maximum stack of 8 chairs per column to minimize storage footprint. Assembly uses knockdown bolted connections with an included hex key, requiring 40 minutes of build time per set, and the pedestal cross base delivers even weight distribution for stable placement on hard, level surfaces. The set is suited for a wide range of outdoor spaces: it fits small residential decks, home courtyards, and compact apartment balconies for casual bistro dining, works for low-traffic commercial settings including cafes, kiosks, and beer gardens, holds up to occasional splashes and humidity in poolside lounge areas, and its stable, relatively lightweight build is appropriate for weight-limited rooftop terraces. The square table layout evenly accommodates four place settings for casual tea, coffee, or light meal service. When procuring this set, note that each unit ships across two cartons with a total packaged volume of 0.8 cubic meters, and plan for sufficient storage space to accommodate stacked chairs during off-season periods if required.

4-Seater Black Slatted Metal Outdoor Patio Bistro Dining Set Specifications

供应商与现货