This 7-piece 6-seater square slatted outdoor patio dining set, model ODS-SQ6-BLK-WPC-01, delivers cohesive, functional seating for open-air dining settings, sold as an unbranded, purpose-built outdoor furniture solution. Its balanced, symmetrical layout centers on a broad square table surrounded by six fixed-position armchairs, arranged to fill a 2500 x 2500 mm overall footprint with generous spacing between seats for comfortable movement. The matte black steel frame uses 1.2mm thick steel tubing finished with E-coat and powder coating, paired with wood-plastic composite slats: 20mm thick slats form the table top, while 15mm thick teak-finish slats make up chair seats and backs, all set with uniform 8mm gaps between parallel pieces. Curved 25mm diameter powder-coated steel tube armrests integrate directly into each chair frame, supported by non-marking plastic adjustable foot glides at leg bases, with all assembly points secured using stainless steel rust-resistant bolts and screws. The set offers deliberate, user-focused practical features: slat gaps allow free rainwater drainage to prevent surface pooling, a 40mm diameter center table hole accommodates standard patio umbrellas for integrated sun shading, chairs stack vertically for compact off-season storage, adjustable foot glides compensate for uneven outdoor surfaces, and the smooth WPC and powder-coated surfaces wipe clean with a damp cloth for simple routine care. Each fixed, non-swivel, non-reclining chair supports 136 kg of static weight, with a 450 mm seat height, 450 mm of backrest height above the seat, and usable seat dimensions of 450 x 420 mm. The table provides 675 mm of knee clearance below the apron, with a static distributed weight capacity of 136 kg. The frame’s rust-resistant finish delivers 3 years of service life, and materials withstand operating temperatures from -20 to 60 °C, resisting moisture and chlorine damage for long-term outdoor use. This set is well suited for residential backyards, garden terraces, and balconies hosting family meals, plus commercial outdoor bistro, coffee shop, and restaurant patio areas, poolside deck installations, and open-air events including outdoor weddings, community gatherings, and pop-up dining experiences, performing reliably on paved stone, concrete, wood deck, and compacted gravel surfaces. When procuring, note the set ships in 2 cartons with a total packaged gross weight of 120 kg and 0.8 m³ packaging volume, requiring 40 minutes of assembly per unit; select from the available 6 finish options to match existing site decor, and source a 38mm diameter patio umbrella to pair with the table’s center hole for optimized sun protection.