纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2010 × 480 × 560 mm
Leg height	110 mm
Central open cubby compartment size	600 x 400 x 180 mm per cubby
Drawer internal dimensions	630 x 380 x 130 mm per drawer
Top panel thickness	30 mm
Carcass side panel thickness	18 mm
Back panel thickness	9 mm
Shelf thickness for open cubbies	18 mm
Floor clearance under base	110 mm
Rear cable cutout diameter	60 mm
Carcass Panel Thickness	25 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Top surface static load capacity	136 kg
Recommended maximum TV size	85 inch
Drawer slide cycle rating	50000 open/close cycles
Net weight	65 kg
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles
Anti-tip Fixing Reference	Products above 1200 mm should use at least 2 wall fixing points
Recommended Procurement Warranty	Carcass 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Top panel	Solid rubberwood with matte clear water-based finish
Drawer fronts and carcass panels	Solid rubberwood, flush handleless construction
Legs	Solid rubberwood, angled tapered design
Open cubby shelves	Solid rubberwood, fixed position
Drawer slides	Soft-close full-extension ball bearing steel slides
Back panel	Plywood with ventilated cutouts
Finish coating	Low-VOC matte water-based lacquer
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Drawer operation	Push-to-open soft-close mechanism, no external handles
Cable management	Three rear 60mm cutouts aligned to open cubbies
Central storage layout	Two stacked open cubbies for AV equipment access
Side storage layout	Four stacked drawers (two left, two right) for concealed storage
Ventilation	Open cubby rear panels include ventilation slots
Assembly requirement	Leg attachment only, carcass pre-assembled
Cable / Vent Opening Reference	80 mm diameter; recommend 4rear cable/vent openings

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary use space	Residential living room media wall, positioned below wall-mounted or standing TV
Matching furniture set	Pairs with matching tall glass-front side display cabinets for coordinated media wall
Secondary use case	Low profile sideboard for open-plan living/dining areas, storing tableware and linens
Target user	Households preferring Scandinavian/Nordic minimalist natural wood interiors
Recommended placement	Against flat wall with 100mm clearance behind for cable routing and ventilation

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Domestic and kitchen storage units and worktops - safety requirements and test methods
EN 13722:2004	Furniture - strength and durability of storage furniture for non-domestic use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural integrityAcceptance
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture
GB/T 4893.8-2013	Test method for surface abrasion resistance of furniture finishes

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural integrityAcceptance；
2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture；
3. GB/T 4893.8-2013：Test method for surface abrasion resistance of furniture finishes；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · TVC-NOK-2010

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · TVC-NOK-2010

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · TVC-NOK-2010打开导出工具

页面快速操作

发布采购询价

产品描述

The Nordic Light Oak Solid Wood TV Media Console (model TVC-NOK-2010) is an unbranded storage piece rooted in Scandinavian minimalist design, defined by clean, unadorned lines and warm natural wood tones. Its low-profile rectangular form features angled tapered solid wood legs elevating the main carcass, with a flush, handleless front facade that creates a seamless, uncluttered visual profile. The central section houses two stacked open cubbies, flanked symmetrically by two stacked drawers on the left and two on the right, creating a balanced, symmetrical layout suited to curated interior schemes.
Constructed primarily from solid light natural rubberwood, the console features a 30mm thick top panel finished with a low-VOC matte clear water-based lacquer that highlights the wood’s natural grain. Carcass side panels measure 18mm thick, open cubby shelves are 18mm thick fixed solid rubberwood, and the back panel is plywood fitted with ventilated cutouts. Drawer fronts use solid rubberwood for a flush finish, supported by soft-close full-extension ball bearing steel slides, and angled tapered legs are cut from solid rubberwood. Major joints use M6-M8 cam/bolt fittings with at least two fixing points per connection, and all visible edges feature 2mm edge banding for a polished, durable finish.
Functional design supports streamlined media use: the push-to-open soft-close drawer mechanism eliminates protruding hardware, with each drawer rated for 45kg load capacity and 50,000 open-close cycles, while hinges support 165° opening over 80,000 cycles. The central open cubbies include aligned rear cable cutouts and ventilation slots, with three 60mm rear openings to route cords for AV equipment, and each fixed shelf supports 30kg distributed load. The top surface holds up to 136kg of static weight, accommodating TVs up to 85 inches, and the carcass arrives pre-assembled, requiring only leg attachment for setup. Assembly takes an 40 minutes per unit.
This console is designed for primary placement on residential living room media walls, positioned below wall-mounted or standing TVs with 100mm clearance behind the unit for cable routing and airflow. It pairs seamlessly with matching tall glass-front side display cabinets for a coordinated media wall look, and works as a low-profile sideboard in open-plan living and dining areas to store tableware and linens, serving households that favor Nordic minimalist natural wood interiors.
Procurement teams should note the unit ships across multiple cartons with a total packaged gross weight of 100kg and total packaging volume of 0.65m³ per set. For space planning, the fully assembled unit measures 2010mm wide, 480mm deep, and 560mm tall, with 110mm leg height. Internal storage includes 600 x 400 x 180mm central cubbies and 630 x 380 x 130mm per drawer, so teams should confirm these dimensions align with intended AV equipment or stored items prior to ordering.

Nordic Light Oak Solid Wood TV Media Console with 4 Drawers and Central Open Cubbies Specifications

供应商与现货