纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1400 × 800 × 500 mm
Tabletop thickness	20 mm
Metal perimeter trim width	30 mm
Table edge accent band height	50 mm
Pedestal base length	1200 mm
Pedestal base depth	350 mm
Pedestal base height	430 mm
Central metal slat assembly width	120 mm
Corner radius of tabletop	30 mm
Floor clearance under base	20 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Distributed tabletop static load	100 kg
Point load capacity at center	30 kg
Product net weight	55 kg
Heat resistance of tabletop	1200 °C
Surface scratch hardness (Mohs)	6
Recommended maximum serving users	6
Finish abrasion resistance	2000 cycles
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop surface	20mm polished sintered stone with white-grey natural veining
Tabletop perimeter trim	1.2mm thick dark bronze coated carbon steel
Edge accent band	Matte light beige painted MDF strip
Pedestal outer frame	1.5mm thick dark bronze welded carbon steel
Pedestal side infill panels	18mm light beige textured MDF panels
Central support slats	8 vertical 20x10mm dark bronze carbon steel bars
Bottom foot pads	4 non-slip 20mm diameter rubber pads
Base panel finish	Scratch-resistant matte polyurethane coating
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Flat serving surface	Full continuous stone top accommodates tea trays and serving ware
Central support structure	Vertical metal slats create open visual base without blocking legroom
Floor protection	Rubber foot pads prevent scratches on hard flooring and reduce slip
Heat-resistant surface	Sintered stone top supports direct placement of hot teapots and kettles
Stain-resistant top	Non-porous polished surface allows quick wiping of tea and liquid spills
Low-profile design	500mm height optimized for seated use from sofas and floor cushions
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Tabletop carton dimensions	1450 x 850 x 70 mm
Base carton dimensions	1250 x 400 x 500 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room	Placed in front of sofas for daily tea service and casual entertaining
Office reception lounge	Used in visitor waiting areas for serving beverages to guests
Private tea room	Supports traditional kung fu tea preparation with space for kettles and trays
Studio lounge space	Serves as a low central table for creative work sessions and light refreshments
Recommended accessory pairing	Compatible with standard 800x200mm bamboo or stone tea trays

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2016	Furniture – Strength, durability and safety for non-domestic tables
EN 12521:2015	Furniture – Strength, durability and safety for domestic tables
EN 13722:2004	Furniture – Test methods for surface resistance to cold liquids
EN 71-3:2019	Migration of certain elements, applicable for low-emission finish checks

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to base panel components
GB/T 4897.3-2015	Particleboard requirements for dry-condition furniture structural use, applicable to MDF infill
GB 18584-2001	Indoor decorating material limit of harmful substances for wooden furniture
GB/T 19001-2016	Quality management system reference for production consistency checks

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to base panel components；
2. GB/T 4897.3-2015：Particleboard requirements for dry-condition furniture structural use, applicable to MDF infill；
3. GB 18584-2001：Indoor decorating material limit of harmful substances for wooden furniture；
4. GB/T 19001-2016：Quality management system reference for production consistency checks；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-ST1400-KFT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-ST1400-KFT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-ST1400-KFT打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Sintered Stone Kung Fu Tea Coffee Table (model CT-ST1400-KFT, unbranded) features a refined, light luxury modern silhouette defined by a continuous rectangular tabletop and low-profile pedestal base, balanced to feel visually open while maintaining structural presence. The polished 20mm sintered stone top carries soft white-grey natural veining, framed by slim dark bronze coated carbon steel perimeter trim, with a matte light beige painted MDF edge accent band anchoring the tabletop’s lower edge. The pedestal base pairs a welded dark bronze carbon steel outer frame with light beige textured MDF infill panels finished with scratch-resistant matte polyurethane coating, supported by a central assembly of vertical dark bronze carbon steel slats that preserve clear legroom without creating visual heaviness. Non-slip rubber foot pads line the base’s bottom corners to protect hard flooring surfaces and reduce unwanted movement.
Built for regular serving use, the table supports a distributed static tabletop load of 100 kg and a 30 kg point load at its center, with a sintered stone surface rated for 1200°C heat resistance to allow direct placement of hot teapots and kettles. The non-porous polished top resists staining from tea and liquid spills, enabling quick, low-effort cleanup after use. Its 500mm overall height is optimized for seated use from sofas or floor cushions, with enough surface area to accommodate up to 6 users during service. The base incorporates built-in cable management capacity for power and data cables, suitable for spaces with connected serving or work equipment. The table is compatible with standard bamboo or stone tea trays to support traditional kung fu tea preparation.
This piece fits seamlessly across residential living rooms positioned in front of sofas for daily use and casual entertaining, office reception lounges for serving guests, dedicated private tea rooms, and open studio lounge spaces for collaborative sessions paired with light refreshments. Procurement teams should note the unit ships as one set across two separate cartons, with a 40-minute reference assembly time per unit, and a packaged gross weight of 90 kg per set. Orders can be paired with compatible standard-size tea trays to streamline out-of-box setup for end users.

Modern Sintered Stone Kung Fu Tea Coffee Table Specifications

供应商与现货