Product supplierModern Sintered Stone Kung Fu Tea Coffee Table, 20mm polished sintered stone with white-grey natural veining
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1400 × 800 × 500 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Metal perimeter trim width | 30 mm | |
| Table edge accent band height | 50 mm | |
| Pedestal base length | 1200 mm | |
| Pedestal base depth | 350 mm | |
| Pedestal base height | 430 mm | |
| Central metal slat assembly width | 120 mm | |
| Corner radius of tabletop | 30 mm | |
| Floor clearance under base | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Distributed tabletop static load | 100 kg | |
|---|---|---|
| Point load capacity at center | 30 kg | |
| Product net weight | 55 kg | |
| Heat resistance of tabletop | 1200 °C | |
| Surface scratch hardness (Mohs) | 6 | |
| Recommended maximum serving users | 6 | |
| Finish abrasion resistance | 2000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface | 20mm polished sintered stone with white-grey natural veining | |
|---|---|---|
| Tabletop perimeter trim | 1.2mm thick dark bronze coated carbon steel | |
| Edge accent band | Matte light beige painted MDF strip | |
| Pedestal outer frame | 1.5mm thick dark bronze welded carbon steel | |
| Pedestal side infill panels | 18mm light beige textured MDF panels | |
| Central support slats | 8 vertical 20x10mm dark bronze carbon steel bars | |
| Bottom foot pads | 4 non-slip 20mm diameter rubber pads | |
| Base panel finish | Scratch-resistant matte polyurethane coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Flat serving surface | Full continuous stone top accommodates tea trays and serving ware | |
|---|---|---|
| Central support structure | Vertical metal slats create open visual base without blocking legroom | |
| Floor protection | Rubber foot pads prevent scratches on hard flooring and reduce slip | |
| Heat-resistant surface | Sintered stone top supports direct placement of hot teapots and kettles | |
| Stain-resistant top | Non-porous polished surface allows quick wiping of tea and liquid spills | |
| Low-profile design | 500mm height optimized for seated use from sofas and floor cushions | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Tabletop carton dimensions | 1450 x 850 x 70 mm | |
|---|---|---|
| Base carton dimensions | 1250 x 400 x 500 mm | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room | Placed in front of sofas for daily tea service and casual entertaining | |
|---|---|---|
| Office reception lounge | Used in visitor waiting areas for serving beverages to guests | |
| Private tea room | Supports traditional kung fu tea preparation with space for kettles and trays | |
| Studio lounge space | Serves as a low central table for creative work sessions and light refreshments | |
| Recommended accessory pairing | Compatible with standard 800x200mm bamboo or stone tea trays |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture – Strength, durability and safety for non-domestic tables | |
|---|---|---|
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables | |
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids | |
| EN 71-3:2019 | Migration of certain elements, applicable for low-emission finish checks |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base panel components | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard requirements for dry-condition furniture structural use, applicable to MDF infill | |
| GB 18584-2001 | Indoor decorating material limit of harmful substances for wooden furniture | |
| GB/T 19001-2016 | Quality management system reference for production consistency checks |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base panel components; 2. GB/T 4897.3-2015: Particleboard requirements for dry-condition furniture structural use, applicable to MDF infill; 3. GB 18584-2001: Indoor decorating material limit of harmful substances for wooden furniture; 4. GB/T 19001-2016: Quality management system reference for production consistency checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool