The LINGKEN CF-WD05-BK is a fixed-leg, four-legged conference armchair defined by a classic, professional visual profile pairing a warm red-brown bentwood frame with tailored black upholstery, for a balanced, formal aesthetic suited to professional environments. Its cohesive, structured layout features a continuous bentwood frame that integrates curved armrests spanning from front legs to the upper back frame, paired with a horizontally segmented, stitched backrest that delivers subtle visual texture without disrupting its clean, timeless silhouette. Constructed for heavy-duty commercial use, the chair’s primary frame is made of kiln-dried solid bentwood finished with five coats of water-based reddish-brown lacquer, with 15mm thick multi-layer bent plywood forming the seat and back support panels. Integrated solid wood horizontal cross braces between legs boost structural rigidity, connected by zinc-plated steel screws and dowel connectors, while non-marking polyethylene foot pads protect flooring surfaces. Upholstery uses 1.3mm thick, breathable, fade-resistant black PU leather across both seat and back; the seat is padded with high-resilience cold-cured polyurethane foam at 50kg/m³ density, while the back uses molded high-resilience polyurethane foam at 35kg/m³ density with a built-in lumbar support contour, finished with horizontal segmented channel stitching. The upholstery is rated for 50000 abrasion cycles, with 60% foam rebound, a recommended static user load of 150kg, and a 5-year structural warranty. Designed for static, upright positioning, the chair has no height adjustment, swivel, tilt, or recline functions, with a fixed 460mm seat height optimized for standard 750mm conference tables. It is stationary with no casters, non-stacking, and its five segmented padded back channels deliver targeted mid-back lumbar support, while integrated bentwood armrests provide consistent upper body support during extended sessions. This armchair is well suited for corporate conference rooms, executive reception areas, regular training rooms, government meeting halls, and office visitor or interview seating, pairing particularly well with 2.4m executive desks for formal reception setups. For procurement planning, note each unit ships in two cartons, requires 40 minutes of assembly per set, and loads 135 units per 20GP container at 85% space utilization, making bulk ordering for large facility fit-outs straightforward to coordinate.